New Motor Brushes Needed

[That's Normal]

So it looks like the brushes on my old discontinued Lackmond Beast 7 saw are worn out. Not sure which brushes to buy. No answer at Lackmond and the website says it's a 13 amp motor. There's a few different versions on Amazon but not sure which one would fit.

[cx]

Is there an indication of brand anywhere on the motor, Kirk?

Any identifying number on the brushes or contacts?

I've found Grainger the best place to shop for electric motors and parts over the years.

[CaliGrown]

They might have the good old replacement schematics online to help ya narrow it down. I’ve put lower demand brushes from the mixing drill into my old rigid tile saw a few times to get me by till the right ones came about

[That's Normal]

There's no info on the motor except the lackmond logo. The brush itself measures 1/4" x 3/8"

[That's Normal]

They look alot like these. https://www.amazon.com/Ryobi-Motor-0...ref=mp_s_a_1_3

[Lazarus]

I have generally found that I can go to my local Ace Hardware store and physically match up old brushes for new.....they have a wide selection.

[Tilehelperdan]

What Lazarus said. Or if you have an old school electronics store nearby they can often be of help.

[Tool Guy - Kg]

Tilehelperdan! Awesome-sauce!



Very good to see you!

[Tiger Mountain Tile Inc]

I think it's Delta that made the motors on the Beast saws. Usually, you'll see their triangle logo around somewhere.

But you might look for Delta replacement parts. 96-107 is the model number of the 7-inch Delta

[Tiger Mountain Tile Inc]

[That's Normal]

Yea it is the delta motor and those brushes I ordered from Amazon fit perfectly! Thanks guys.