Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 11-10-2019, 09:46 PM   #1
ItchyVols
Registered User
 
Join Date: Aug 2018
Posts: 17
Bradley’s fireplace surround

After having good success tiling my bathroom I’ve decided to tackle another project for which I am under qualified. The previous tile was laid such that it was higher than the level of the surrounding hardwood. I would like to ensure that the tile I lay is flush with the hardwood

The vertical tiles of the surround were laid on top of the original tiles that were set there which was laid on top of about an inch thick mud bed which was on top of brick. So there is a hefty chunk I have to build back out to have a proper substrate on which to lay my tile.

What I need to figure out now is how to level out the floor substrate once I have demo’d down far enough - slc, cbu, or just mud? And also how to build out the vertical aspect to be plum or just shy of the trim that is there - cbu or mud?


Sent from my iPhone using Tapatalk
__________________
Bradley
ItchyVols is offline   Reply With Quote
Sponsored Links
Unread 11-10-2019, 10:00 PM   #2
Davy
Moderator -- Mud Man
 
Davy's Avatar
 
Join Date: Jan 2003
Location: Princeton,Tx.- Dallas area
Posts: 31,764
I'd use mud for both areas. Wall mud on the face and deck mud for the hearth. For the face, I usually set 1x4 boards around the inside of the firebox and use them as screeds. Cut the side boards to fit tight enough to hold the top board in place.
__________________
Davy

www.davystephenstile.com
Davy is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bradley’s master bath ItchyVols Tile Forum/Advice Board 20 10-22-2019 09:54 AM
fireplace surround diy noob Tile Forum/Advice Board 1 11-28-2012 10:54 PM
fireplace surround CAKMOM2 Tile Forum/Advice Board 5 09-02-2010 01:19 PM
fireplace surround red3 Tile Forum/Advice Board 0 07-17-2009 02:05 AM
Fireplace surround help Deadpool9 Tile Forum/Advice Board 5 12-06-2008 07:54 AM


All times are GMT -6. The time now is 07:09 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC