|
Cleaning travertine
I set some 1" x16" Honed & filled Trvertine marble in a bathroom ( 160'Sq.)
I use DITRA & set the tile with C cure 911 with the C- cure 948 additive.
To control Lippage I had to pull, B.Buter & reset alot of the tiles. Install looks great but I have a bit of adhesive film /haze on some of the tiles. It did not show up when I cleaned the squeeze out but showed up after the watr dried. I can scrape most of it off with a razor blade & or a sharpened plastic knife.. Any Advice on cleaning Would be greatly appreaciated.
Greg
|
