Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 05-30-2006, 07:36 PM   #1
rockjet
Registered User
 
Join Date: May 2006
Posts: 47
1/2 inch boards/what size screws?

hi again....i know,i know, i'm a pain in the butt!....


another quick question, please.

i'm using 1/2" hardibacker cement boards.

are the hardibacker 1 1/4" the correct size for the 1/2" boards.??

they will be going directly into studs.

thanx!..........mike
rockjet is offline   Reply With Quote
Sponsored Links
Unread 05-30-2006, 07:42 PM   #2
MudMaker
The Revolution has begun/Make America Great Again
 
MudMaker's Avatar
 
Join Date: Jan 2006
Location: Centerville, Ohio
Posts: 8,313
Q: What type of fastener do you recommend for floor and wall applications of Hardibacker?
A: In compliance with the tile industry, James Hardie recommends 1-1/4" long galvanized or stainless steel roofing nails (0.121" shank x 3/8" HD) or 1-1/4" long corrosion resistant ribbed waferhead screws (No. 8-18 x 3/8" HD).
__________________
mm (aka "Paco")
MudMaker is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:31 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC