Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Professionals' Hangout

Sponsors


Reply
Thread Tools Search this Thread
Unread 08-24-2020, 10:00 AM   #4741
cx
Moderator emeritus
 
cx's Avatar
 
Join Date: Jul 2001
Location: Boerne, Texas
Posts: 90,914
Welcome, Matthew.

How did you determine that the grout was not "sealed properly" on that installation?
__________________
CX

Y'ALL NEW VISITORS READ THIS HERE!
cx is online now   Reply With Quote
Unread 08-24-2020, 10:27 AM   #4742
Tiger Mountain Tile Inc
Registered Muser
 
Tiger Mountain Tile Inc's Avatar
 
Join Date: Feb 2011
Location: Issaquah, Washington
Posts: 6,917
I'm in a real estate investment group on Facebook and these listing photos were the subject of some laughs recently.

Name:  home flipper kitchen.jpg
Views: 466
Size:  41.8 KB

Name:  flipper bathroom.jpg
Views: 441
Size:  52.1 KB

Name:  flipper shower.jpg
Views: 442
Size:  34.0 KB
__________________
James Upton

Why you should NOT buy a newly remodeled home ~DIYTileGuy
Tiger Mountain Tile Inc is offline   Reply With Quote
Unread 08-25-2020, 05:33 PM   #4743
Shady at Best
Tyrone shoelaces
 
Shady at Best's Avatar
 
Join Date: Apr 2014
Location: Sacramento, ca
Posts: 700
This isn't tile related but deserves a mention. I was diagnosing a water leak and doing the sheet rock repair afterwards. I cut open the ceiling and it's pretty obvious to me on what was leaking and causing the damage in the ceiling. The customer has insurance on this stuff so she called the company to have them send out a plumber. The plumber came out and couldn't find the leak. I think it's pretty obvious to a non plumber that the gasket in the tub drain is leaking. But no, the plumber said he didn't see the problem.


Sent from my SM-G965U1 using Tapatalk
__________________
Travis

It's just a clever handle.
Shady at Best is offline   Reply With Quote
Unread 08-25-2020, 09:58 PM   #4744
CaliGrown
Registered User
 
CaliGrown's Avatar
 
Join Date: May 2016
Location: Turlock, CA
Posts: 439
Insurance claims dept. plumber you say.. Why of course that there ya see is just some good old plumbers tracing and spit scum back from when they did the install. What a joke. H.O. is best off dealing with you direct, I would imagine the insurance co. would drag their feet heavily, especially if their “plumber” is this special.
__________________
Christopher Machado
Central Valley, CA 1 (916) 990-1751
“ Sometimes you set tile, other times tile sets you!”
- The Brutally Honest Tile Mechanics -
Joseph Peres (7/16/95 - 8/31/19)
CaliGrown is offline   Reply With Quote
Unread 08-27-2020, 07:32 AM   #4745
Just In Tile LLC
Registered User
 
Just In Tile LLC's Avatar
 
Join Date: Sep 2015
Location: East Texas
Posts: 1,340
Looked at a shower "repair" Jim that reminds me of your pictures. She called because the floor was holding water in some spots. I saw the floor drain was one made for an insert. First problem.

The tile had no finish pieces and the barcodes printed on the tile edge were showing all around the entrance to the shower. Second Problem

I gave her the repair recommendation. Tear it out and start over.
She looked at me like I was an alien.

As far as the plumbing leaking pictures, I've said it somewhere else on the forum, I think competent tile guys are slowly turning into remodeling contractors. We have an eye for detail, and already have a small dabble of every trade under our belts with all the places tile can go. That is where I see tile going, tradesmen of one trade are becoming outdated in most places.
__________________
Justin
"Being world class means knowing you're good, but never satisfied you're good enough"
Just In Tile LLC is offline   Reply With Quote
Unread 08-27-2020, 09:55 AM   #4746
ceramictec
Tampa Florida Tile Contractor
 
ceramictec's Avatar
 
Join Date: Oct 2007
Location: Tampa, Florida
Posts: 26,452
They almost got it.........

Name:  F81DC6EA-44BC-4466-A7D2-4DC80EB1B0BC.jpeg
Views: 362
Size:  69.3 KB
__________________
Brian
........
..........Tampa Florida Tile Installation
..............^^--Check out our Blog--^^
Tampa, Florida installer of Schluter Kerdi/Kerdiboard waterproofed showers
Tampa, Florida installer of Laticrete HydroBan/HydroBan board waterproofed showers
ceramictec is offline   Reply With Quote
Unread 08-30-2020, 07:03 PM   #4747
Kman
Moderator
 
Kman's Avatar
 
Join Date: Nov 2006
Location: NW Arkansas, Ozark Mountains
Posts: 11,588
Name:  118403472_4566448066702214_7393461897187779855_n.jpg
Views: 316
Size:  83.7 KB
__________________
Kevin

The top ten reasons to procrastinate:

1.
Kman is offline   Reply With Quote
Unread 09-16-2020, 07:14 AM   #4748
DOnNyRoc
Registered User
 
Join Date: Feb 2014
Posts: 8
How not to do a custom shower base

Did this repair on a shower base.... bathroom was renovated about 6 years ago. Started leaking a year ago and customer had multiple plumbers say it was a trap. She finally let me cut a large section of ceiling out below this and I saw it was leaking from subfloor. After demoing it. Discovered previous contractor cut the membrane incorrectly around drain and tried to patch it with a piece of leftover membrane with a ton of silicone. Lasted about 5 years, not bad for a poor job. Subfloor was weak.... no preslope.... drain wasn’t screwed down....patched hole with cement board. I replaced subfloor with new plywood. Created a preslope. Leak tested it. Couldn’t find exact tile. Customer didn’t mind do to shower having a frosted glass so you can’t see it from outside of it. So far so good. Sorry I forgot to take a few pics. But like I said there is new subfloor and preslope done.
Attached Images
     
__________________
Don

Last edited by DOnNyRoc; 09-16-2020 at 07:18 AM. Reason: Forgot to mention something
DOnNyRoc is offline   Reply With Quote
Unread 09-16-2020, 08:13 AM   #4749
Radas
Tile Newbie
 
Join Date: Jan 2016
Location: SE MI
Posts: 329
Nice work - that duct taped, silicones liner reminds me of my recent new construction shower I demo'd before we decided to even use it. Building inspector and builder were adamant that everything was done correctly lol.

Sent from my Pixel 3 using Tapatalk
__________________
Ali

..a new excuse to hoard tools
Radas is offline   Reply With Quote
Unread 09-16-2020, 08:36 AM   #4750
cx
Moderator emeritus
 
cx's Avatar
 
Join Date: Jul 2001
Location: Boerne, Texas
Posts: 90,914
Don, I've moved your post here from where I found it in the Advice forum as it does not appear to be a project thread.

And I'll once again invite you to add a geographic location to your User Profile and a little biographical information, too, while you're in there.

I'd get ready for some comments such as you got with your shower repair in Post 4009 of this thread.

Appears the new pan liner does not extend above the top of the shower curb, is nailed below the level of the curb top, is also nailed onto the curb top, and the finished curb piece being fastened to the pan liner on the curb top somehow?
__________________
CX

Y'ALL NEW VISITORS READ THIS HERE!
cx is online now   Reply With Quote
Unread 09-16-2020, 11:52 PM   #4751
LAN1870
BATHROOM REMODELING
 
LAN1870's Avatar
 
Join Date: May 2007
Location: Harriman, NY
Posts: 412
“I'd get ready for some comments such as you got with your shower repair in Post 4009 of this thread.

Appears the new pan liner does not extend above the top of the shower curb, is nailed below the level of the curb top, is also nailed onto the curb top, and the finished curb piece being fastened to the pan liner on the curb top somehow?”

Exactly CX! I never do pan repairs like this because it cannot be done correctly with a partial tear out. but I guess people get the level of repair they pay for huh?
__________________
Leslie
Owner/Installer
Bathroom Solutions
Bathroom Remodeling
"Attention To Detail Comes First"
LAN1870 is offline   Reply With Quote
Unread 09-20-2020, 05:00 PM   #4752
Weitekamp Remodeling
Weitekamp Remodeling and Construction
 
Join Date: Apr 2016
Location: Antioch, CA
Posts: 20
Yikes. I guess the topic of this thread explains the last post. That shower should have been completely demoed and if budget didn't allow, you should of walked away.
__________________
Jay
Weitekamp Remodeling is offline   Reply With Quote
Unread 09-21-2020, 12:42 AM   #4753
Tool Guy - Kg
Moderator -- Wisconsin Kitchen & Bath Remodeler
 
Tool Guy - Kg's Avatar
 
Join Date: Feb 2005
Location: Oak Creek, WI
Posts: 22,012
Oh, boy.
__________________
Tonto Goldstein... but my friends call me Bubba

Help an awesome summer camp!
Tool Guy - Kg is offline   Reply With Quote
Unread 09-22-2020, 05:51 PM   #4754
Davy
Moderator -- Mud Man
 
Davy's Avatar
 
Join Date: Jan 2003
Location: Princeton,Tx.- Dallas area
Posts: 32,818
They will then nail CBU along the bottom of the walls which will add more nails that are too low.
__________________
Davy

www.davystephenstile.com
Davy is online now   Reply With Quote
Unread 09-22-2020, 05:57 PM   #4755
Radas
Tile Newbie
 
Join Date: Jan 2016
Location: SE MI
Posts: 329
Saw this 'rustic' backsplash reading a home depot review for a cup rinser.

Sent from my Pixel 3 using Tapatalk
__________________
Ali

..a new excuse to hoard tools
Radas is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Absolute worst tile finishing job pitterpat Professionals' Hangout 17 04-02-2007 07:12 PM
worst of the worst... botched jobs Dan O'Connor Tile Forum/Advice Board 5 02-22-2007 03:21 PM
best and worst tile saw in $300-$500 range LinLee Tile Forum/Advice Board 9 01-30-2006 01:50 AM
best and worst tile saw in $300-$500 range johnnyaico Tile Forum/Advice Board 10 01-27-2006 03:05 PM
The worst job................ opiethetileman The Mud Box 6 10-08-2004 10:48 PM


All times are GMT -6. The time now is 06:22 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC