Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 10-27-2022, 09:38 PM   #1
Mikeltee
Registered User
 
Join Date: Sep 2015
Posts: 23
What size notch for Raimondi leveling system?

Hey guys. I'm about to finish the last 400sf of my basement on a slab with no decoupling membrane. Its prepped and level. The first 600sf I used a 3/8 notch and did not use a leveling system. I was proud of it 4 years ago, but now I recognize the flaws and it looks terrible. I'm going to do it right this time. I have the Raimondi system with red clips. My buddy told me I need to use a 1/2" notch. Is this correct? If so, I'll have to float the first row that butts up against the existing tile, but if that's what it takes, that's what I shall do. They are 12x12s with a straight lay pattern. I plan to use 1 clip per side in the center and may use some leave in spacers on the corners at least for the first couple rows. I'll be using a laser as well for the first row. Thanks

Name:  20221026_180850.jpg
Views: 76
Size:  44.5 KB
__________________
Mike
Mikeltee is offline   Reply With Quote
Sponsored Links
Unread 10-31-2022, 12:06 AM   #2
Tool Guy - Kg
Moderator -- Wisconsin Kitchen & Bath Remodeler
 
Tool Guy - Kg's Avatar
 
Join Date: Feb 2005
Location: Oak Creek, WI
Posts: 23,458
Hi Mike,

If you’re only going to use 1 clip per side (in the center), I’d rather skip the clips altogether.

Before going much further, can we ask about what’s the shiny coating on the slab? And it looks like you’ve got at least a couple cracks, as well?

__________________
Tonto Goldstein... but my friends call me Bubba

Help an awesome summer camp!
Tool Guy - Kg is offline   Reply With Quote
Unread 10-31-2022, 10:06 AM   #3
Tiger Mountain Tile Inc
Registered Muser
 
Tiger Mountain Tile Inc's Avatar
 
Join Date: Feb 2011
Location: Issaquah, Washington
Posts: 7,371
I'm wondering if your friend is suggesting a 1/2 notch trowel because the plastic bases of the leveling system are too thick?

I would typically start with a 3/8 trowel for 12x12s.

Also, it's a common misconception that leveling clips make your floor flat. The way to have a flat tile floor is to have a flat floor to lay the tile on.
__________________
James Upton
How-to mix a small batch of thinset perfectly, every time.
Tiger Mountain Tile Inc is online now   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
question about Raimondi tile leveling system-wall lizuw Tile Forum/Advice Board 6 01-16-2018 08:42 PM


All times are GMT -6. The time now is 06:39 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC