Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Professionals' Hangout

Sponsors


Reply
Thread Tools Search this Thread
Unread 03-02-2020, 03:09 PM   #1
Shady at Best
Tyrone shoelaces
 
Shady at Best's Avatar
 
Join Date: Apr 2014
Location: Sacramento, ca
Posts: 634
Favorite or best multitool blades?

I am in the market for some new blades for my dewalt multitool. I usually use dewalt or imperial. I am not super impressed with the imperial and dewalt are difficult to source. I was looking at some blades the other day and they are getting close to $15 each. I want the best possible blade if I am going to pay that price.
I am mainly using them to cut nails and wood. I know better than to try to cut screws.
What's your favorite? Have you ever heard or had them sharpened or a new cutting edge replaced?

Travis
__________________
Travis

It's just a clever handle.
Shady at Best is offline   Reply With Quote
Sponsored Links
Unread 03-02-2020, 06:30 PM   #2
Davy
Moderator -- Mud Man
 
Davy's Avatar
 
Join Date: Jan 2003
Location: Princeton,Tx.- Dallas area
Posts: 32,240
I don't have a link but someone on YouTube was showing how to sharpen them with a file by hand. They weren't like new but did help them go a little longer.

You might check Amazon. I've bought them there before.
__________________
Davy

www.davystephenstile.com
Davy is offline   Reply With Quote
Unread 03-02-2020, 06:48 PM   #3
PC7060
...unrepentant, detail focused, over-analyzer.
 
PC7060's Avatar
 
Join Date: Jan 2013
Location: Virginia
Posts: 2,820
I buy the blades in 10 packs on Amazon and have gotten good service out of these brands.

ACTOMASTER Japan Teeth Precise Oscillating Saw Blade for Oscillating Tool blades

https://www.amazon.com/dp/B07JZDCYJR..._TFAxEbX16H8NE

10 Bi-metal Oscillating Multitool Quick Release Saw Blades
https://www.amazon.com/dp/B00OW4AZX2..._UGAxEbM5ER1FC
PC7060 is offline   Reply With Quote
Unread 03-02-2020, 10:25 PM   #4
Exceed Flooring And Tile
Registered User
 
Join Date: Nov 2015
Location: Madison WI Area
Posts: 41
I feel your pain on the price of these handy little blades. I spring for the $10 per blade Bosch(link below). I've purchased these before for almost $16 a piece, so I'm happy to spend $100 on a 10 count pack. They normally come in a handy little case too. These particular ones from Bosch cut thru it all, and last the longest out of all I've tried. I have been using these exclusively for years. If you switch between a new nice one for clean wood and a beat up one for nails, screws, staples ect....., I find the 10 pack lasting a lot longer. These wide ones are awesome for door jambs. I use them for a wide range of tasks on every single project. Couldn't operate without them lol!
Bosch OSL212F-10 2.5 In. Starlock Oscillating Multi-Tool Cut Blade https://www.amazon.com/dp/B01M17QGJ2..._GKDxEbF0PZX34
__________________
Rayman
Exceed Flooring And Tile is offline   Reply With Quote
Unread 03-03-2020, 09:46 AM   #5
Just In Tile LLC
Registered User
 
Just In Tile LLC's Avatar
 
Join Date: Sep 2015
Location: East Texas
Posts: 1,294
I'll usually buy two types of blades, a wood one and a everything else carbide one. (worth every penny) Since the wood ones are cheap I don't mind guessing wrong if a nail got in the way, but I do try and choose the blade on the odds I'll hit a nail. The carbide blades will eat screws no problem so they last a LONG time.

Current Carbide Blade
https://www.amazon.com/dp/B01MG7OGLW...v_ov_lig_dp_it

Current Wood blade
https://www.amazon.com/dp/B07F1GD51P...v_ov_lig_dp_it
__________________
Justin
"Being world class means knowing you're good, but never satisfied you're good enough"
Just In Tile LLC is offline   Reply With Quote
Unread 03-03-2020, 03:45 PM   #6
tilemanct
Tile & Stone
 
Join Date: Sep 2002
Location: Northeast/Connecticut
Posts: 2,502
I use the Imperial Blades as my lumber yards distribute them. I use a lot of the diamond ones for grout removal and soft tile cutting. I wish someone would make a multi tool blade with the same diamond that is on a dry cut diamond blade for a grinder. The electroplated ones for multi tools don't have longevity. Even with water applied.
__________________
Dave

CTEF Certified Installer
I lost my hero on 5-21-16 You will be missed. Semper Fi
tilemanct is offline   Reply With Quote
Unread 03-05-2020, 06:53 PM   #7
Shady at Best
Tyrone shoelaces
 
Shady at Best's Avatar
 
Join Date: Apr 2014
Location: Sacramento, ca
Posts: 634
Thanks for all the replies. I will check out thre Bosch, the ones from Japan and the imperial.
I think I mainly use the multitool for cutting holes in drywall and under cutting jambs.
I like the cleanliness of the holes in the drywall versus using a drywall saw.
I find that multitool's are okay for a lot of jobs. But they aren't exactly great at anything, I have bought the 'titanium' coated metal cutting blades from imperial and dewalt and wasn't impressed with how fast they wore out.
I think I will get a little file and try sharpening the coarse blades for drywall.
Thanks again
__________________
Travis

It's just a clever handle.
Shady at Best is offline   Reply With Quote
Unread 03-05-2020, 10:50 PM   #8
Tool Guy - Kg
Moderator -- Wisconsin Kitchen & Bath Remodeler
 
Tool Guy - Kg's Avatar
 
Join Date: Feb 2005
Location: Oak Creek, WI
Posts: 21,680
Take a look at this unique blade made by Imperial. Even if you only have one of these in the toolbox, I think you’ll find it very useful.

__________________
Tonto Goldstein... but my friends call me Bubba

Help an awesome summer camp!
Tool Guy - Kg is offline   Reply With Quote
Unread 03-14-2020, 11:37 AM   #9
Tiger Mountain Tile Inc
Registered Muser
 
Tiger Mountain Tile Inc's Avatar
 
Join Date: Feb 2011
Location: Issaquah, Washington
Posts: 6,760
I had purchased some no-name cheap blades on Amazon to try out. Just the other day, I was on my last one of the "wood with nails" blades and changed it out to a brand new Fein brand starlock blade and the Fein blade just blasted through the nails with very little effort. It went through probably 10 framing nails before I put the thing away.

So I guess my point is that there is a difference in the quality of the blades.
__________________
Jim Upton
DIYTileGuy
Tiger Mountain Tile Inc is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Favorite drink? Jeremy The Mud Box 110 05-19-2010 05:40 AM
favorite camcorders? sandbagger The Mud Box 19 05-10-2010 05:15 PM
Porcelain blades revisited: what's your favorite? lostinLA Tile Forum/Advice Board 6 05-13-2008 03:39 PM
The Favorite Son Am The Mud Box 1 11-05-2007 03:33 PM
Favorite Blades chefwong Tile Forum/Advice Board 1 08-28-2005 09:28 AM


All times are GMT -6. The time now is 02:06 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC