Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 01-05-2009, 08:08 PM   #1
Doitall
Registered User
 
Join Date: Jan 2009
Posts: 2
First Shower Build

Hi I'm new to this forum and to ceramic tile installation. I will be building my first ceramic tile shower and am currently researching the Kerdi and Wedi systems. My first question is on water supply lines. What is the typical wall thickness after backerboard thinset and tile? Do most plumbers leave a female thread inset in the wall to thread a brass nipple into after the tile is complete or do they put the nipples in prior to tiling? I'm using Moen products and the instructions for the body spray give a tolerance of 1/2" to 5/8" protusion from the finished wall surface.

Thanks in advance for any help.

Last edited by Doitall; 01-05-2009 at 08:09 PM. Reason: spelling
Doitall is offline   Reply With Quote
Sponsored Links
Unread 01-05-2009, 08:12 PM   #2
davem
Systems Engineer and Moderator, JB Forums
 
davem's Avatar
 
Join Date: May 2002
Location: Dexter, MI
Posts: 14,084
Send a message via AIM to davem Send a message via Yahoo to davem
Hi Do, welcome to the forum. I'll let the pro's answer, I just wanted to say hi.
davem is online now   Reply With Quote
Unread 01-05-2009, 08:21 PM   #3
custombuilt
Tile and remodeling contractor
 
Join Date: Jan 2007
Location: Quincy, IL
Posts: 2,794
most of the time the plumbing is stubbed out already when i tile.... install cbu around it and tile around
__________________
---------------------------------------------------
Jason W.

Superior Construction
Custom Interior and Exterior remodeling experts
Quincy, IL
custombuilt is offline   Reply With Quote
Unread 01-05-2009, 08:31 PM   #4
John Bridge
Mudmeister
 
Join Date: Mar 2001
Location: Rosanky, Texas
Posts: 67,656
Send a message via AIM to John Bridge
Welcome aboard, Doitall. Please give us a first name.

For the shower head you use an "eared" ell inside the wall. You screw in a temporary half-inch pipe nipple with a cap on it. After tiling and grouting you will remove the temporary nipple, the "stub out" and replace it with a nipple of the correct length for your fixture. Here is a picture of the eared ell with the temporary nipple screwed into it.
Attached Images
 
John Bridge is offline   Reply With Quote
Unread 01-06-2009, 04:21 PM   #5
Doitall
Registered User
 
Join Date: Jan 2009
Posts: 2
Thanks John the name is Dave. Should I figure an inch for wall thickness to set the valves that have no nipples.
Doitall is offline   Reply With Quote
Unread 01-06-2009, 04:44 PM   #6
muskymike
Retired Moderator -- Wisconsin Tile Man & Musky Guide
 
muskymike's Avatar
 
Join Date: Apr 2004
Location: Springbrook WI
Posts: 16,083
Send a message via Yahoo to muskymike
Hi Dave, you hafta know what your tile thickness is and the sheeting (CBU or drywall if using Kerdi) before you set the valve. There should be a plate that is on the valve that shows you where to set it to the finished wall .
__________________
Musky Mike
Corrado Custom Tile
Kerdi Shower Specialist
Dreams are like tasting a little bit of the future today. Keep dreaming and it will come true.

New here? Check this out.

muskymike is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bob's Curbless Shower Bathroom Remodel Bob V. Tile Forum/Advice Board 33 09-15-2008 06:42 PM
Frequent DIYer, need help planning shower re-tile chowfun Tile Forum/Advice Board 11 11-20-2005 10:29 PM
Please Help -- Leaking Acrylic Shower Base Ricketty Rabbit Tile Forum/Advice Board 5 07-22-2005 10:36 AM
Completed Project w/ Lessons Learned brianp Tile Forum/Advice Board 21 05-25-2005 12:12 PM
Kerdi shower questions TTurner Tile Forum/Advice Board 8 02-09-2005 10:29 AM


All times are GMT -6. The time now is 08:06 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC