Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 08-31-2020, 02:21 PM   #1
Lmaya7409
Registered User
 
Join Date: Aug 2020
Posts: 2
Flood Test Aquadefense Question

ok- here goes nothing

I built a shower pan with 4 to 1 mud mix and created a slope using fool proof sticks and then covered with AD. I flood tested the shower and saw some of the bottom the of pan change colors back to the original green of AD. I understand this is normal- however my question is when draining the water I noticed a couple of places where the water didn't drain completely. Can I "fix" this with thin set when I lay the tiles or do I need to fix the slope now and then recover with AD? If I need to fix the slope now, can I just lay the 4 to 1 mud mix back over it using a slurry just prior or what???
__________________
LH, Denver
Lmaya7409 is offline   Reply With Quote
Sponsored Links
Unread 08-31-2020, 02:53 PM   #2
Tiger Mountain Tile Inc
Registered Muser
 
Tiger Mountain Tile Inc's Avatar
 
Join Date: Feb 2011
Location: Issaquah, Washington
Posts: 6,949
I think it should be fixed prior to tiling. However, you don't want to fix it with the 4:1. I'm thinking something like Ardex Feather Finish might be your best bet in that scenario but I don't remember if it's OK for wet areas. I think it's Planipatch they don't want you using in wet areas.

You might call Mapei and see what their solution is. Planipatch is their product and that way you're keeping everything in-brand.
__________________
James Upton

Tired of bullnose tile trim? Here are 5 edge trim alternatives ~DIYTileGuy
Tiger Mountain Tile Inc is online now   Reply With Quote
Unread 09-01-2020, 11:49 AM   #3
Metropolitan Ceramics
Registered User
 
Join Date: Apr 2019
Location: Canton, Ohio
Posts: 75
Do you have any pictures showing the areas that didn't drain completely? If they are small (quarter size), it's probably not going to impact the performance of your system. If they are larger hollow areas, you can use Mapecem Quickpatch. Give MAPEI's technical services a call and they'll steer you in the right direction. 800-992-6273
__________________
Dan Marvin - VP of Operations
www.ironrock.com
Metropolitan Ceramics is offline   Reply With Quote
Unread 09-02-2020, 08:31 AM   #4
Lmaya7409
Registered User
 
Join Date: Aug 2020
Posts: 2
I called Mapei and they suggested Planiprep SC over the floor to fill in the pits and then recover it with Aquadefense. That's happening today!!
__________________
LH, Denver
Lmaya7409 is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Kerdi 7 Day Flood Test 916tile Professionals' Hangout 134 06-09-2019 01:33 PM
flood test plug jwmezzanotte Professionals' Hangout 16 03-18-2013 09:19 PM
Failed flood test bayne Tile Forum/Advice Board 13 09-23-2012 09:10 PM
Flood Test Question MNTileGuy Professionals' Hangout 10 04-15-2010 04:33 AM
when to flood test? remodel123 Tile Forum/Advice Board 8 04-04-2010 09:15 AM


All times are GMT -6. The time now is 10:16 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC