Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 12-06-2022, 10:01 PM   #1
Jonny Socko
Registered User
 
Join Date: Mar 2022
Posts: 2
CBU at the front of the tub

Hey guys,

I always run into issues where I'm trying to install skinny strips of cbu vertically on the walls that meet the front of the tub. The cbu is already only 2 inches and with acrylic tubs there is a flange that requires an inch to be removed or rabbetted to accommodate. The cbu always blows up when it has little integrity left. What's your trade secret for these finicky areas? I've tried finish nailing these pieces in before so the screws dont turn the cbu to trash. Wondering what creative solutions are out there.

Thanks,
Jon
__________________
Jon
Jonny Socko is offline   Reply With Quote
Sponsored Links
Unread 12-06-2022, 10:30 PM   #2
Kman
Moderator
 
Kman's Avatar
 
Join Date: Nov 2006
Location: NW Arkansas, Ozark Mountains
Posts: 12,383
It's not something recommended by the manufacturer, or discouraged either, but I put some construction adhesive on it and use sheetrock nails to hold it in place.

If you're setting natural stone of any kind, I wouldn't use metal fasteners of any sort, due to the rust that could come through over time. In that case I'd find some way to temporarily secure the pieces til the adhesive dries.
__________________
Kevin

The top ten reasons to procrastinate:

1.
Kman is offline   Reply With Quote
Unread 12-09-2022, 11:33 PM   #3
Tool Guy - Kg
Moderator -- Wisconsin Kitchen & Bath Remodeler
 
Tool Guy - Kg's Avatar
 
Join Date: Feb 2005
Location: Oak Creek, WI
Posts: 23,451
I’m very similar to Kevin, except I use ring shank underlayment nails that are slightly thinner with a thinner head. In most cases, the board and these potentially rusting nails get some waterproofing over them.

Or, I’ll use my carbide hammer drill bits to run an over-sized pilot hole and use Hardibacker “Backer-On” screws. These exact screws have a head that more easily sinks into the surface of the cement board instead of cracking/splitting the cement board.

__________________
Tonto Goldstein... but my friends call me Bubba

Help an awesome summer camp!
Tool Guy - Kg is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dan's Front Hall CTDan Tile Forum/Advice Board 8 07-20-2015 09:41 PM
outside front steps Jon in Atlanta Tile Forum/Advice Board 3 10-24-2014 03:00 AM
Front Entryway tyrel Tile Forum/Advice Board 7 09-04-2012 10:30 AM
Bar Front Coderabit Tile Forum/Advice Board 32 03-24-2011 08:30 AM
Front Porch needs help DoofusOfTheDay Tile Forum/Advice Board 14 04-15-2006 08:11 PM


All times are GMT -6. The time now is 09:31 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC