Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 05-26-2009, 04:32 PM   #1
LJN55
Lyle from Cedar Hills, Utah
 
Join Date: Feb 2005
Location: Cedar Hills, Ut
Posts: 5
Porcelain title over Kerdi

I am working on a steam shower. I will be using 8X8 porcelain tile. I know that Kerdi recommends that we use unmodified thinset. However, what would you use to hold the tiles on the ceiling? Mastic is what I have used on ceilings before, because of the stickiness of the product.

Any suggestions?
LJN55 is offline   Reply With Quote
Sponsored Links
Unread 05-26-2009, 04:45 PM   #2
Lazarus
Texas Tile Contractor
 
Lazarus's Avatar
 
Join Date: Oct 2006
Location: Beaumont, Texas
Posts: 8,639
Forget the mastic. It will NEVER fully cure and PARTICULARLY in a steam environment, you're gonna get tiles falling down on your head.

"What would you use?" UNMODIFIED thinset over the Kerdi. Why do you doubt the pros?
__________________
Laz...


A man who carries a cat by the tail learns something he can learn in no other way.
Lazarus is online now   Reply With Quote
Unread 05-26-2009, 04:47 PM   #3
jadnashua
Veteran DIYer- Schluterville Graduate

STAR Senior Contributor

 
Join Date: Jul 2004
Location: Nashua, NH
Posts: 14,869
You certainly don't want mastic in a steam shower!

One technique is to make a ring of thinset around the outer edge of the tile. Then, press it up onto the ceiling. That ring acts like a suction cup and will hold the tile up if you do it right and once the thinset cures, will hold it forever. Since you're not going to be walking on the ceiling, not having 100% coverage isn't a big deal.
__________________
Jim DeBruycker
Not a pro, multiple Schluter Workshops (Schluterville and 2013 and 2014 at Schluter Headquarters), Mapei Training 2014, Laticrete Workshop 2014, Custom Building Products Workshop 2015, and Longtime Forum Participant.
jadnashua is online now   Reply With Quote
Unread 05-26-2009, 04:52 PM   #4
TileArt1
Fort Collins, Colorado Tile & Stone Contractor
 
TileArt1's Avatar
 
Join Date: Apr 2007
Location: Fort Collins, Colorado
Posts: 2,733
Hi Lyle,

I have two suggestions:

Unmodified works just fine, in my opinion. Just don't get the cheap $5.00/bag garbage.

Stop using mastic especially in a steam shower -BIG no no. Tiles will fall off the ceiling if you use mastic.
__________________
Roger (The FloorElf)

<img src=http://www.johnbridge.com/images/mod/jmg/TileArt1.png border=0 alt= />

Custom Tile & Stone installation
Fort Collins, Colorado

CTEF Certified Tile Installer #847

Social dysfunction can be traced to the abandonment of reason
TileArt1 is offline   Reply With Quote
Unread 05-26-2009, 05:54 PM   #5
rjnebbo
Extreme DIY'r
 
rjnebbo's Avatar
 
Join Date: Apr 2009
Location: Anaheim, CA
Posts: 47
No mastic!!

You'll could end up Spastic if you use Mastic, even worse, using on a ceiling could led to a early Casket.

Use what is recommended from the manufacturer
__________________
-Bob
rjnebbo is offline   Reply With Quote
Unread 05-26-2009, 06:24 PM   #6
ceramictec
Tampa Florida Tile Contractor
 
ceramictec's Avatar
 
Join Date: Oct 2007
Location: Tampa, Florida
Posts: 26,495
hey Lyle,

for your situation I would recommend and ultralight thinset.

like Laticrete 255 multimax or Tec 3n1 or Mapei Ultralite.

a good unmodified like Ditraset would work or even a Versabond, but for the porcelain and the ceiling I like the the better thinset's
__________________
Brian

Tampa Florida Tile Installation
^^Check out our Blog^^
ceramictec is offline   Reply With Quote
Unread 05-26-2009, 06:49 PM   #7
Rkeister
Registered User
 
Rkeister's Avatar
 
Join Date: May 2009
Location: Yardley, PA
Posts: 173
I would strongly suggest 3N1 as brian stated, my concern is that it's not going to be backed by schluter being latex modified. However, with TEC you can't win over ditra because TEC specifically specifies to use their superflex over ditra & kerdi. I had a contractor use 3N1 over kerdi and it took days to dry.
__________________
-Ryan
Burlington, NJ Sales Rep
www.avaloncarpettile.com
Rkeister is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to change the title of a thread justbeachy42 Tile Forum/Advice Board 19 05-27-2009 09:09 PM
New title shower install ANiak Tile Forum/Advice Board 2 02-25-2005 10:41 AM
What is your title on your business card? Glassy Girlie Professionals' Hangout 20 08-17-2004 05:51 PM


All times are GMT -6. The time now is 05:12 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC