Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 09-14-2007, 06:59 PM   #1
dmaceld
Registered User
 
Join Date: Mar 2007
Location: Nampa, ID
Posts: 24
Why do they say "not for counter tops"?

I was looking at some tile at the local big box and noticed that most of them are labeled whether they are suitable for wall, floor, and counter top. I think all are listed OK for wall and floor, but only some for counter top. Now I figure that the ceramic and porcelain tiles that are labeled not suitable for countertops would be because they're too soft or too brittle.

But what's got me wondering is the granite tiles. They're labeled not suitable for counter tops. Why would that be, because granite slabs are used for counter tops? The tiles are about 1/4" thick. I really want to consider using granite tiles for my counter tops. That way I get granite tops for a lot less money. And in the future, if one gets stained badly you just break it out and replace it.

What am I missing, if anything?
__________________
Mac Eld
Nampa, ID

What a way to spend retirement, building a house!
dmaceld is offline   Reply With Quote
Sponsored Links
Unread 09-14-2007, 07:02 PM   #2
Danny Ferguson
Arkansas Tile Man -- Retailer
 
Join Date: Oct 2005
Location: Mountain Home, AR
Posts: 402
Send a message via AIM to Danny Ferguson
It might be because there are no trim psc available for that specific tile.
__________________
Loving what you do is not a job.
Danny Ferguson is offline   Reply With Quote
Unread 09-14-2007, 07:12 PM   #3
jdm
Registered User
 
jdm's Avatar
 
Join Date: Dec 2004
Location: South Joisey
Posts: 5,217
Plenty of people use granite tiles on countertops. But not all granite is created equal. Properties vary greatly from stone to stone. I'm guessing that the granite you have is very porous all will suck up moisture and stains. Sealing the stone would help, of course, but you still might experience problems.

If you have a sample of the granite, try wetting part of the stone for a few moments and then dry it off. If the wetted part darkens, then it is pretty porous.
__________________
jeff

Go Rutgers!
jdm is offline   Reply With Quote
Unread 09-14-2007, 07:37 PM   #4
Brad Denny
Tile Contractor Nashville, TN
 
Brad Denny's Avatar
 
Join Date: Mar 2007
Location: Joelton, TN
Posts: 4,163
That's right, Jeff, and I know some of the cheaper stone will scratch easier than others. I've gotten Absolute Black from India (maybe?) that was strong and bulletproof and the same color from China that would scratch with the slightest abrasive. The big box might be covering themselves.
__________________
Brad


Brad Denny is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:09 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC