Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 08-29-2006, 06:21 AM   #1
MGH
Registered User
 
Join Date: Aug 2006
Posts: 1
shower renovations in an old house

We are remodeling the bath room and like most projects in an old house the project gets bigger as you go. Here is the situation; the front wall of the tub/shower surround is not plumb. It falls away just shy of ½ inch from the top of the tub to the ceiling. I know I should shim out the cement backer board to make the wall nice and plumb. However to do that would mean we need to take out the sheet rock on the entire wall or have some odd joint where the tile stops. Plumbing the wall will no doubt run into additional unexpected complications, such as the doorway in the corner of the room. So, my question is this. How awful will it look if we gradually increase the width of the first column of tiles going up the back wall? Or, should we just go get a three piece tub surround?
MGH is offline   Reply With Quote
Sponsored Links
Unread 08-29-2006, 07:23 AM   #2
bbcamp
Registered User
 
Join Date: Jul 2002
Posts: 30,274
You can hide the problem easier if you are using large tiles, say 6x6 or larger. Your layout should leave tiles that are larger than 1/2 size in the corners.

Another approach may be to shim the backerboard only in the area to be tiled, then use a v-cap or some other trim to create a ledge all the way around the shower. The ledge on the out-of-plumb wall will be slightly deeper than the others. This turns your problem into a "feature."
bbcamp is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:40 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC