Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 11-22-2005, 06:52 AM   #1
bunt
Registered User
 
Join Date: Jan 2004
Location: china, michigan
Posts: 57
grouting a large area.

I am not looking for to grouting the 380 square feet of tile I just installed, but i know it's gotta be done . The tiles are 12x12 with 1/4" grout joints. I would like to do it all in one shot, but if I cant, what is the best way to do it to avoid grout mismatching? It's a darker grout with a darker tile,....so I think it may be noticeable. I will be using custom products grout (not prism).
__________________
.....Larry
bunt is offline   Reply With Quote
Sponsored Links
Unread 11-22-2005, 07:04 AM   #2
bullseye
Registered User
 
Join Date: May 2005
Posts: 99
Smile

i would use for eg:a cup or somethin to measure the same amount af grout and the same amount of water tha i would use to mx the first batchto mix the second batch but thats what iwoulddo maybe someone has a better idea goodluck happy grouting
bullseye is offline   Reply With Quote
Unread 11-22-2005, 07:27 AM   #3
Jeff_kitchen
Registered User
 
Join Date: Dec 2004
Posts: 507
Hi Larry,
if you're concerned about mismatch grout color and if you've put a fair amount of effort into getting the tile laid properly, I'd suggest you try to avoid the question altogether and maybe just get a buddy to help. Wouldn't you hate to actually end up with a slight color mismatch.
I did a kitchen and laundry about the same sq feet but with epoxy grout which I think is much more difficult to put down. I've never used regular grout, but my impression is that it's considerably less effort compared to epoxy grout. You're right though; I was dead tired after doing it.
Jeff_kitchen is offline   Reply With Quote
Unread 11-22-2005, 07:40 AM   #4
squeakydeke
Just enough knowledge to be dangerous...
 
squeakydeke's Avatar
 
Join Date: May 2005
Location: Bowie, MD
Posts: 246
Larry, in addition to drafting a helper, make sure you dry mix all of your grout prior to starting. Get a large bucket and dump all of your bags of grout into it a little at a time and keep stirring. Use additional buckets and mix between them if necessary. Take your time and try to keep the dust to a minimum. Buy more than you think you will need. I would rather throw some away (or keep the extra in an airtight bucket) than have to open a new bag in the middle of a job. I grouted a large area over two days after dry mixing and I had a perfect color match. You can not tell where I stopped. Taking your time and doing it right is more important than doing it all in one day, especially if you are using non-epoxy grout. If you get tired and sloppy in a marathon grouting session, you will have to stare at the results for a long, long time. Don't worry, the project will go faster as you gain confidence and experience. Start slow and get the hang of it first. A good clean-up of the area you have just grouted is more important than doing it all in one shot. Just my two cents.
__________________
-Frank
My project: Now celebrating Year 3!
squeakydeke is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:37 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC