Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Cleaning, Restoration and Sealing

Sponsors


Reply
Thread Tools Search this Thread
Unread 03-29-2020, 03:36 PM   #1
txbatson
Registered User
 
Join Date: Mar 2020
Posts: 2
Water Droplet Mark Grey Porcelain Tile

We purchased classic gray polished porcelain tile and had a local installer install it. We are noticing darker gray spots from water on the tile. I took one of the left over tiles and put a large droplet of water on it and let it set. After wiping the very light white film off the mark, the underside is is a darker gray circle. Trying to clean with water and vinegar didn't address. I know there are other ways of cleaning but can someone explain how this is happening. Will some other form of cleaning fix this? Is it a defect in the tile. Can porcelain tile can be porous and have this staining under the glaze?
Attached Images
 
__________________
Glenn
txbatson is offline   Reply With Quote
Sponsored Links
Unread 03-29-2020, 04:00 PM   #2
txbatson
Registered User
 
Join Date: Mar 2020
Posts: 2
Answering part of my question but now what to do!

So just read the below. I had looked up porcelain tile and it said that it didn't need to be sealed. I didn't realize I needed to designate polished. Sigh. So to elaborate more this was clean water. We live in College Station, Texas which is supposed to have soft water. The water was straight from the tap and clear when I made the droplet.

So what can we do now. If we seal over these spots I assume they will be there forever. If we want to get rid of them do we have to rip up spotted tile and replace?

========
Found Online
Polished porcelain needs to be sealed with a good impreganator sealer. I use Fila porcelain impreg sealer, lay the tiles, give the the full floor a good coat of impreg sealer then grout. Reason you seal polished porcelain is that the polishing process open millions of tiny hols in the tile surface and dirt and grime can get into them and cause dulling. Matt porcelain needs sealing too.
__________________
Glenn
txbatson is offline   Reply With Quote
Unread 03-29-2020, 04:52 PM   #3
Davy
Moderator -- Mud Man
 
Davy's Avatar
 
Join Date: Jan 2003
Location: Princeton,Tx.- Dallas area
Posts: 32,447
I can't say why this happened for sure but we have seen this on the forum before. Folks have posted pictures of dark shades in showers, usually near the bottom where water has soaked in from the back side turning the clay bisque darker and it showing thru the glaze. All glazed tiles are not equal. Can you share what brand these tiles are and where they are made? I've only seen this once myself and those tiles were Incepa brand which are made in Brazil.
__________________
Davy

www.davystephenstile.com
Davy is offline   Reply With Quote
Unread 03-29-2020, 09:25 PM   #4
Tool Guy - Kg
Moderator -- Wisconsin Kitchen & Bath Remodeler
 
Tool Guy - Kg's Avatar
 
Join Date: Feb 2005
Location: Oak Creek, WI
Posts: 21,843
Does hitting the spot with a hair dryer for a few minutes cause the spot to vanish?

__________________
Tonto Goldstein... but my friends call me Bubba

Help an awesome summer camp!
Tool Guy - Kg is offline   Reply With Quote
Unread 03-31-2020, 10:40 AM   #5
John Bridge
Mudmeister
 
Join Date: Mar 2001
Location: Rosanky, Texas
Posts: 67,914
Send a message via AIM to John Bridge
"Polished" porcelain should always be sealed before grouting, and some folks seal it right out of the box. Polishing in this case means grinding the surface, which opens up microscopic cavities in the body of the tiles. So your surface, then, is pitted. I don't know how to completely cure the problem.
John Bridge is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help!! Water Marks on Polished Porcelain Silva1992 Cleaning, Restoration and Sealing 4 01-28-2020 02:30 PM
Water stain on sealed porcelain tile Roger3125 Cleaning, Restoration and Sealing 9 08-05-2009 07:14 PM
See Picture Newbie Used Grey Thinset - Granite Stain or Water surfceo Tile Forum/Advice Board 4 04-20-2009 06:57 PM
honed porcelain tile water spots jb1978234 Cleaning, Restoration and Sealing 5 04-07-2009 07:18 AM
cut tile turned grey from being wet jgfons Professionals' Hangout 6 03-18-2005 06:05 AM


All times are GMT -6. The time now is 06:53 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC