Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
 
Thread Tools Search this Thread
Old 06-20-2019, 05:26 AM   #1
Kemal Gokturk
Registered User
 
Join Date: Jun 2019
Posts: 2
Backer behind tile wall

Hello

We are working on a remodel and will have one wall covered in tile. The wall is fourteen feet long and vaults from 9 feet to roughly 20 feet. It is in the kitchen, but is not a wet wall. The studs are currently exposed and we are ready to resheath. The drywall guy says drywall will be fine for this area, but I'm wondering with all the weight of the tile if something more rigid would be more appropriate.

Drywall fellow says he can use cement board but I'm also wondering if there is not a more modern and easily available product to put here ... Or he is right and sheetrock is fine.

Thanks
k.
__________________
Kemal
Kemal Gokturk is offline   Reply With Quote
Sponsored Links
Old 06-20-2019, 05:40 AM   #2
Elkski
Took the Schluter part 1 class my team won!
 
Elkski's Avatar
 
Join Date: Apr 2007
Location: Wasatch front, Utah
Posts: 673
I'm sure an expert will drop by soon. But I read where they say raw drywall is a good surface to put tile on. Screws every 8". But it should not matter if 5' wall or 30' tsll. No tape and mud at seams or if you do then you need to prime that. Maybe even use some tile primer.
You need to wipe dust off and wet ( not to wet) the wall before putting tile on.
__________________
Teddy
Elkski is online now   Reply With Quote
Old 06-20-2019, 07:56 AM   #3
jadnashua
Veteran DIYer- Schluterville Graduate

STAR Senior Contributor

 
Join Date: Jul 2004
Location: Nashua, NH
Posts: 12,889
The load is in shear. If they actually use the industry fastening guidelines on drywall, it should be fine. Most installers end up short on the number and spacing of fasteners, or they end up punching through the surface paper, which makes that screw almost useless. They will want to apply the alkali resistant mesh tape as they tile for the seams to help tie the sheets together. While it can be installed prior (with thinset), it's often easy to end up with a speed bump.
__________________
Jim DeBruycker
Not a pro, multiple Schluter Workshops (Schluterville and 2013 and 2014 at Schluter Headquarters), Mapei Training 2014, Laticrete Workshop 2014, Custom Building Products Workshop 2015, and Longtime Forum Participant.
jadnashua is offline   Reply With Quote
Old 06-20-2019, 08:05 AM   #4
Carbidetooth
Hmmmmm
 
Carbidetooth's Avatar
 
Join Date: Mar 2010
Location: Boise, ID
Posts: 1,311
The rigidity of the wall is primarily provided by framing. If it's lateral deflection you're concerned about you could either used wider framing lumber (2x6) or plate the wall with plywood.


Tile assemblies on walls concentrate most of the load in vertical shear, not the tipping force I think many imagine. Well attached (screwed) drywall should be adequate. Tile backer will just add to the weight of the whole assembly which may be a bigger concern. What supports the wall?
__________________
Peter

Silicone Sealant Ranger
Carbidetooth is online now   Reply With Quote
Old 06-21-2019, 05:07 AM   #5
Kemal Gokturk
Registered User
 
Join Date: Jun 2019
Posts: 2
Thanks for the feedback. Drywall it is.

k.
__________________
Kemal
Kemal Gokturk is offline   Reply With Quote
Old 06-21-2019, 06:09 AM   #6
Kman
Moderator
 
Kman's Avatar
 
Join Date: Nov 2006
Location: NW Arkansas, Ozark Mountains
Posts: 10,609
I'd ask that the installers use screws throughout that wall, and no nails. Sheetrock nails can loosen over time, which would be fatal to the tile covering. Screws every 8" won't back out like nails will.
__________________
Kevin

The top ten reasons to procrastinate:

1.
Kman is online now   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wall tile cemented to cement backer board! KennyK Tile Forum/Advice Board 3 07-09-2017 06:56 AM
Wall Tile Backer Board: Hardie, DensShield, Kerdi Board and others: Thoughts? machinemanjr Tile Forum/Advice Board 14 04-21-2017 04:40 PM
Repair tile&backer shower wall Patches123 Tile Forum/Advice Board 1 08-09-2011 04:17 AM
Wall Tile 1/4 or 1/2 backer doyle0523 Tile Forum/Advice Board 15 12-09-2009 08:10 PM
Plywood Behind Backer On Wall?? jharrellh Tile Forum/Advice Board 4 06-17-2007 08:13 PM


All times are GMT -6. The time now is 12:54 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC