Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 01-06-2021, 10:50 AM   #16
ss3964spd
Moderator
 
ss3964spd's Avatar
 
Join Date: Jul 2005
Location: Fairfax, Va
Posts: 3,799
Send a message via Yahoo to ss3964spd
Schluter will provide a warranty even if you only OHM the cable before, during, and after installation. But they will extend the warranty if you meg it also.

As far as the rug goes, best to avoid altogether, but the ones with a non-slip rubber type backing are the worst. They say not to place a rug anywhere on the heated floor, I don't recall them singling out the location of the heat sensor, Technically, I don't believe the sensor to be a thermocouple, though I concede the thermostat probably won't operate without the sensor.
__________________
Dan
---------------------------------------------------------------------------------
If I recall correctly my memory is excellent, but my ability to access it is intermittent.

Last edited by ss3964spd; 01-06-2021 at 11:02 AM.
ss3964spd is online now   Reply With Quote
Unread 01-06-2021, 12:27 PM   #17
Elkski
Took the Schluter part 1 class my team won!
 
Elkski's Avatar
 
Join Date: Apr 2007
Location: Wasatch front, Utah
Posts: 848
yes just like you need the cable 4" away from cabinets a rug will allow that area to get to hot. It has to be a thermocouple . It would not be that hard to cut the cable because you get to cleaning out excess thinset and its easy to grab something sharp.
__________________
Teddy
Elkski is offline   Reply With Quote
Unread 01-08-2021, 07:33 PM   #18
ejc_1
Registered User
 
Join Date: Jan 2020
Posts: 6
Thanks guys, sorry I just checked in.
__________________
Ed
ejc_1 is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Using Modified Thin Set for Marble Tile Over Schluter Ditra Heat sfklaas Tile Forum/Advice Board 14 02-20-2019 11:38 PM
Ditra heat question chapinpark Tile Forum/Advice Board 45 01-27-2016 09:19 PM
Ditra Heat Question. My Dream Tile Forum/Advice Board 10 11-29-2015 05:47 PM
What temp do you set your electric radiant heat at? yds Tile Forum/Advice Board 8 09-17-2010 06:47 PM
Question for heat mats + Ditra kamik19 Tile Forum/Advice Board 1 11-21-2005 04:27 PM


All times are GMT -6. The time now is 02:44 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC