Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 11-22-2020, 06:55 PM   #1
curtis085
Registered User
 
Join Date: Nov 2020
Posts: 1
Cutting 68" long porcelain tile

Im tiling 8 x 68 wood look tile on floors. Whats the best way to cut this sized tile?
curtis085 is offline   Reply With Quote
Sponsored Links
Unread 11-22-2020, 06:58 PM   #2
mykcuz
Registered User
 
Join Date: Aug 2020
Posts: 68
Very carefully, ha.

Sent from my SM-G950U using Tapatalk
__________________
Mike
mykcuz is offline   Reply With Quote
Unread 11-22-2020, 07:03 PM   #3
Tool Guy - Kg
Moderator -- Wisconsin Kitchen & Bath Remodeler
 
Tool Guy - Kg's Avatar
 
Join Date: Feb 2005
Location: Oak Creek, WI
Posts: 22,339
Welcome to the forum, Curtis.

Do you have any equipment already? Like a tile snapper? Or angle grinder with a diamond blade?

__________________
Tonto Goldstein... but my friends call me Bubba

Help an awesome summer camp!
Tool Guy - Kg is offline   Reply With Quote
Unread 11-22-2020, 09:08 PM   #4
smifwal
Registered User
 
Join Date: Mar 2016
Location: Kansas City
Posts: 1,479
You need the XL sigma
https://youtu.be/AOG56GY1eic

But how many length rip cuts do you have? Are they covered by base or 1/4 round? I did a job last year with a 8x48 that only had 3 full length rips, I have a sigma that will rip 60 inches, I didn't feel like it was worth dragging out that beast for 3 cuts so I use the smaller sigma for the 8 inch side and then just used a angle grinder for the rips. It is definitely faster with the snapper but the time it would have took me to unstrap it from where it rides in the trailer and set it up was about the same but less work so I went with the grinder.
__________________
Shawn

Last edited by smifwal; 11-22-2020 at 09:14 PM.
smifwal is offline   Reply With Quote
Unread 11-22-2020, 11:28 PM   #5
Kman
Moderator
 
Kman's Avatar
 
Join Date: Nov 2006
Location: NW Arkansas, Ozark Mountains
Posts: 11,730
Grinder with a very good diamond blade for the long and corner cuts. If you have a good snap cutter you can make the short cuts.

For the grinder blade, a thinner blade makes very accurate cuts, but it's also prone to warping if you don't keep a steady hand. I would recommend a continuous rim blade rather than a segmented one to avoid chipping.
__________________
Kevin

The top ten reasons to procrastinate:

1.
Kman is offline   Reply With Quote
Unread 11-23-2020, 08:27 AM   #6
speed51133
Registered User
 
Join Date: May 2017
Location: Milwaukee WI area
Posts: 1,120
a hand held tile saw (one of the mini circular saw kinds) with a straight edge would be perfect.
https://www.amazon.com/DEWALT-DWC860...45857750&psc=1
__________________
Mike
speed51133 is online now   Reply With Quote
Unread 11-23-2020, 09:44 AM   #7
Tiger Mountain Tile Inc
Registered Muser
 
Tiger Mountain Tile Inc's Avatar
 
Join Date: Feb 2011
Location: Issaquah, Washington
Posts: 6,983
Either what Mike posted above or just go pick yourself up one of the "table saw" style tile saws that are available at the home improvement stores. May as well get an apron while you're at it.
__________________
James Upton

Tired of bullnose tile trim? Here are 5 edge trim alternatives ~DIYTileGuy
Tiger Mountain Tile Inc is offline   Reply With Quote
Unread 11-23-2020, 09:54 AM   #8
fogtown
Registered User
 
Join Date: Jun 2013
Location: Moss Beach, CA
Posts: 28
tracksaw with a dry blade?

I've cut granite slabs cleanly with a tracksaw (Makita, Festool) using an Alpha dry-cut diamond blade ( you have to use a bushing to get the 20mm arbor size in some cases) , you can get the Makita 10' track for around $200, or off-brand Powertec rails for less online. I found a tracksaw as one of those things you can't believe you got along without previously.
__________________
Jon
fogtown is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cutting 24" porcelain tile metrangia Tile Forum/Advice Board 6 05-09-2016 08:52 PM
cutting 20" porcelain tile babbo Tile Forum/Advice Board 9 07-14-2014 10:42 AM
Help with cutting 24" porcelain tile melissadurante Tile Forum/Advice Board 10 08-25-2013 10:45 AM
Cutting 20" Porcelain Tile: Getting Chipout On Edge Philip in Connecticut Tile Forum/Advice Board 1 07-29-2011 01:28 PM
Cutting 20" Porcelain robertser Tile Forum/Advice Board 16 03-31-2005 11:13 PM


All times are GMT -6. The time now is 07:43 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC