Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet

Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board


Thread Tools Search this Thread
Unread 02-06-2023, 07:57 AM   #16
Registered User
Join Date: Feb 2023
Location: Colorado
Posts: 9
So to clarify I have ice and water shield directly to the sub floor then a preslope then an EPDM liner over the preslope. Then my mud bed. The curb in under pavers and mortar. The EPDM is over the curb with lath wrapped on top of the liner and then mortar over the top of the lath. We use EPDM under concrete quite often so I believe the dry mix is fine on top of the EPDM. I will check the backer board height and the height of the fasteners. I have the wall board height set at 1/2” above the finished shower floor. I will check the height of the fasteners in the wall board to see if they are higher than the curb.

Screws are 2” above the curb.

Last edited by Rooferyan; 02-06-2023 at 08:04 AM. Reason: More info
Rooferyan is offline   Reply With Quote

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mortar for Kerdi??? armandtet Tile Forum/Advice Board 11 01-13-2011 05:57 AM
Kerdi Mortar Help? Sardian Tile Forum/Advice Board 4 05-04-2009 09:03 PM
Mortar bed over Kerdi scousi Tile Forum/Advice Board 12 11-27-2007 04:54 PM
Kerdi over mortar bed? bunt Tile Forum/Advice Board 8 10-12-2006 04:21 PM
Kerdi Over Mortar? rdtompki Tile Forum/Advice Board 7 03-23-2006 10:33 PM

All times are GMT -6. The time now is 06:09 PM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC