Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
 
Thread Tools Search this Thread
Old 08-19-2018, 06:55 PM   #16
Davy
Moderator -- Mud Man
 
Davy's Avatar
 
Join Date: Jan 2003
Location: Princeton,Tx.- Dallas area
Posts: 30,473
Hi Ed.
1. If you can cut the plywood at the red lines and get enough blocking under there for support, I see nothing wrong with it. If you can cut the hole in the plywood so the 4 nubs on the bottom of the flange can rest on the plywood, that would support the drain well and also leave about 3/4 inch for the felt, lath and preslope.

2. Any way you want to build out that wall will work. You might need to add another stud to the back wall in the right corner.

3. If I understand correctly, you want to add a jamb to each side, narrowing the opening. We see this quite often, sometimes 5-6 inches on each side, or more.
__________________
Davy

www.davystephenstile.com
Davy is offline   Reply With Quote
Old 08-21-2018, 11:01 AM   #17
ed001
Registered User
 
Join Date: Jun 2016
Posts: 10
I appreciate your helpful comments Davy, which tells me I'm not off base with my plan so far.

And here's one more noob question, for which I can't find much written about online. The most typical finished curb width that I've seen is in the range of 5-6", which starts with a 3 1/2" wide core of stud lumber.

Is a narrower curb width acceptable - something in the range of 4 - 4 1/2" ? (starting with a correspondingly narrower wood core).

Any reason to stay away from a narrower curb?
__________________
Ed
ed001 is offline   Reply With Quote
Old 08-21-2018, 11:14 AM   #18
cx
Da Home Builder
 
cx's Avatar
 
Join Date: Jul 2001
Location: Boerne, Texas
Posts: 86,423
Perfectly acceptable, Ed.

My opinion; worth price charged.
__________________
CX

Y'ALL NEW VISITORS READ THIS HERE!
cx is online now   Reply With Quote
Old 08-21-2018, 11:37 AM   #19
ed001
Registered User
 
Join Date: Jun 2016
Posts: 10
CX, thanks for confirming that a narrower curb is ok. I'm going to lay out some lines for a 2" wood core and a finished 4" curb/walls, and see how that fits in with everything else.
__________________
Ed
ed001 is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Jon's Bathroom Remodel: Completed. EthylOH Tile Forum/Advice Board 176 10-01-2017 08:22 PM
starting a bathroom remodel (jeffs bathroom) boaty Tile Forum/Advice Board 22 09-15-2015 12:50 AM
Help with bathroom remodel Putt et Tile Forum/Advice Board 3 06-26-2013 07:47 PM
Jim's Bathroom Remodel jlmza2350 Tile Forum/Advice Board 6 10-04-2012 03:13 PM
First tile and remodel project - 9x12 bathroom remodel and 6x6 sauna kyle242gt Tile Forum/Advice Board 17 08-25-2011 08:42 AM


All times are GMT -6. The time now is 09:23 PM.


Found usc_block_11 empty, added this: [CODE] [/CODE]
Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC