Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
 
Thread Tools Search this Thread
Old 06-06-2018, 01:12 PM   #16
Just In Tile LLC
Registered User
 
Just In Tile LLC's Avatar
 
Join Date: Sep 2015
Location: East Texas
Posts: 977
I agree with Davy that the issue should of been brought to your attention to go over options, the old tile job was bigger tiles, that would of aided in hiding the ceiling. The window reveals can be cheated slightly to help make things look better. I can understand your side, comparing to the last tile job and how it looked better, but if the ceiling is as far out as these pictures show it's really hard to hide something that bad
__________________
Justin
"Being world class means knowing you're good, but never satisfied you're good enough"
Just In Tile LLC is offline   Reply With Quote
Old 06-06-2018, 03:25 PM   #17
Kman
Moderator
 
Kman's Avatar
 
Join Date: Nov 2006
Location: NW Arkansas, Ozark Mountains
Posts: 9,989
I'd say it's more "impossible" than "hard" to hide something that bad. Even a larger tile would show, albeit a little less than what you have now.

This issue really should have been addressed at the framing/sheetrock level.
__________________
Kevin

The top ten reasons to procrastinate:

1.
Kman is offline   Reply With Quote
Old 06-06-2018, 04:56 PM   #18
workhurts
Registered User
 
Join Date: Jan 2009
Posts: 364
Bottom tiles are probably off because the tub isn't level. Top tiles are off because of ceiling.

You could take a few rows of tile down and fix the wall or fix the ceiling by adding drywall and shims or whatever they're called to make everything level.

If I had to pick my position, I'd rather have level tile everywhere and a crooked ceiling. Maybe cheat up to 1/2" here and there where it's not noticable but I don't see how you can hide what you have.

Can't see the top edge of the old tile.
__________________
Ali
workhurts is offline   Reply With Quote
Old 06-06-2018, 07:56 PM   #19
mark999
Registered User
 
Join Date: Aug 2013
Location: st louis mo.
Posts: 452
If you can not live with it you can hire a carpenter (a very good one) and have then re frame the ceiling level and flat,drywall,paint, and if you want add trim. You can buy trim that does not deteriorate or need paint.
__________________
Mark
mark999 is offline   Reply With Quote
Old 06-07-2018, 12:57 PM   #20
Topspin
SchluterUgrad
 
Topspin's Avatar
 
Join Date: Jul 2006
Location: Seattle Area
Posts: 2,308
I could re-surface that ceiling for about $40 in materials in about three days time. Would look perfect. A really good drywall guy could do that in a day to a day and a half.

If you really want to make that room look sweet, you would need to very carefully chip off the first row of tiles all around, any tiles by the apron of the tub and slide the tub out. Then level the tub out, shove it back in and re-tile that bottom row and apron area. And yeah, there will be some drywall work needed to get that tub out. But that’s the cheap stuff to fix.

And you’ll need an alternate method of waterproofing the wall to tub line. Not that difficult to do. Many products make that possible today.
__________________
Kevin


Topspin is offline   Reply With Quote
Old 06-07-2018, 04:24 PM   #21
Lazarus
Texas Tile Contractor
 
Lazarus's Avatar
 
Join Date: Oct 2006
Location: Beaumont, Texas
Posts: 7,583
Probably the best answer.....
__________________
Laz...

"Women and cats will do as they please, and men and dogs should relax and get used to the idea."
Lazarus is offline   Reply With Quote
Old 06-07-2018, 07:40 PM   #22
tilelayer
South East PA Tile Contractor
 
tilelayer's Avatar
 
Join Date: Aug 2004
Location: Delaware County, PA
Posts: 6,584
he could have pulled full tile off the lowest point of the tub but i dont know what that would give you at the bottom of the wainscotting.

Some jobs you will layout and you just cant get a break others you will layout and then go into a closet and somehow get full tile all along the back wall.

I would try to fix the ceiling.
__________________
-Derrick

***New Here?? Click here to add your name to your signature***

Check out my Blog and see my latest tiling projects!



Specializing in Kerdi Showers
tilelayer is offline   Reply With Quote
Old 06-25-2018, 06:19 PM   #23
iownme
Registered User
 
Join Date: Jun 2018
Location: upstate NY and rural PA
Posts: 93
fixing the ceiling is the only way to go.
i could have it fnished to perfection in a day with second mud coat done next day.
personally i would have gone through that issue with you in the begining, but some people prefer to just do the job asked without taking into account further ramifications.
i can't comment on the tile job because the ceiling has made me too dizzy to see them ;@)
fix ceilng...then see how it all looks.
__________________
Fred
iownme is offline   Reply With Quote
Old 06-25-2018, 06:25 PM   #24
iownme
Registered User
 
Join Date: Jun 2018
Location: upstate NY and rural PA
Posts: 93
oh no.....
i just saw the tile and the window.

that is all unacceptable.
__________________
Fred
iownme is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
First Time Shower Install Advice Needed DanThor Tile Forum/Advice Board 1 02-09-2016 11:05 AM
Advice needed: Tiling around crooked window JDavey Tile Forum/Advice Board 6 11-21-2015 11:53 PM
First Time Shower advice needed! cartali Tile Forum/Advice Board 7 02-05-2011 12:33 AM
I have a tile setting EMERGENCY!!! Time sensitive. MarcusInMD Tile Forum/Advice Board 47 03-07-2006 12:50 PM
Advice Needed for Granite C.T. Installed Crooked Lorinscott Tile Forum/Advice Board 4 10-22-2004 10:01 AM


All times are GMT -6. The time now is 08:58 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC