Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 01-21-2005, 02:52 PM   #1
Dave B
Registered User
 
Join Date: Jan 2005
Posts: 29
Laticrete 253 OK over hardi-backer??

I'm putting down 12 x 12 porcelain floor tiles down onto 1/4 inch hardi-backer.

The thinset I have is Laticrete 253 which is described as a polymer-fortified, thin set mortar.

I called Hardibacker and asked them if this was OK----they said as long as it meets ansi 118.4----it's OK to use as is.

If it only meets ansi 118.1------it'll need some additives.



I'll be damned if if I can find any specs on the bag of laticrete. I called them---unable to reach anybody.

Is this OK to use as is?...........................Thx...Dave B
Dave B is offline   Reply With Quote
Sponsored Links
Unread 01-21-2005, 03:05 PM   #2
bbcamp
Registered User
 
Join Date: Jul 2002
Posts: 30,274
Yep, it's OK!

http://www.laticrete.com/prodsheets/...ts/LDS2961.pdf
bbcamp is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:58 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC