Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
 
Thread Tools Search this Thread
Old 08-24-2009, 04:57 PM   #1
Marct
Registered User
 
Marct's Avatar
 
Join Date: Aug 2009
Posts: 106
Tile Inlay

Hello,

I have just started doing tile inlay by hand, I am an artist, as are all tile layers, but all these are my own artwork / designs.
I dont have any experience in waterjet, or the pricing of waterjet design, so my question is this...
A. is there a market out there for this kind of stuff?
B. does anyone know what it cost's to have something like this cut into stone or ceramic Tile?

Any help would be appreciated.

apileoftile.com
artisansofcolorado.com
Attached Images
   
__________________
Marc
www.apileoftile.com
Marct is offline   Reply With Quote
Sponsored Links
Old 08-24-2009, 06:38 PM   #2
RedRock
Granite, Quartz, and Tile Installer
 
RedRock's Avatar
 
Join Date: Oct 2006
Location: Tri-cities WA
Posts: 1,198
Wow, nice work !!!! And all done by hand.

I don't know what waterjet designs cost but why compete with them. Advertise your artistic abilities. I think there is a market, but don't look for it on Craig's list or ebay.

I haven't done anything that artistic but any custom work that I do is charged at an hourly rate. I think I'm reasonable but not cheap. So charge what your time is worth - at a minimum, not what you think the "market" is willing to pay.
__________________
Juan

__________________________
You are never too old to set another goal or to dream a new dream. - C. S. Lewis
RedRock is offline   Reply With Quote
Old 08-24-2009, 07:10 PM   #3
Marct
Registered User
 
Marct's Avatar
 
Join Date: Aug 2009
Posts: 106
Thank you

Tank you very much for your reply.
__________________
Marc
www.apileoftile.com
Marct is offline   Reply With Quote
Old 08-24-2009, 09:20 PM   #4
quinocampa
DIY'er
 
Join Date: Mar 2009
Location: Indianapolis
Posts: 280
I think I've seen other work like yours over in the Pro's Hangout. There are some artists who do a similar work to yours, that perhaps could advise you. I recall some fancy birds and flowers adorning a restaurant or club entrance? I think the look is wildly distinctive and one-of-a-kind, far more engaging than a tile pattern or even a medallion -- those are more common, though still demanding extensive skill. I think you could find many ritzy places that would tell you what they'd like, or perhaps commission one of your own designs. If I go to another hang-a-gewgaw-on-the-wall restaurant, "look, a rustic canoe paddle and an old maple syrup can!" I'll puke. But stone and other natural materials? Embellished with artisan carvings, paint, etc? Who wouldn't look at that for hours? Go for it, but get some advice from other artists.
__________________
Daniel
History
Granite tile kitchen counters
Granite/slate bathroom -- first JB-guided job. Very nice!
(4) granite window seats -- look great, holding up well
Fireplace -- Slate facade and mantel, granite hearth
Bar counter -- slate insets with oak surround
quinocampa is offline   Reply With Quote
Old 08-24-2009, 09:44 PM   #5
pooky
Registered User
 
pooky's Avatar
 
Join Date: Feb 2009
Posts: 1,309
cool

nice design - nice execution -- diggin' that

very hard to market, but designers are your best bet -- cold call with samples

and . . .

maybe some clever glossy post cards showing exactly what you showed here specifically mailed to designers in your area -- then broaden your mailings from there.

Some distributors would likely keep you on file as well -- it's such a narrow market, but your work looks good and the cream generally rises to the top.

kudos and good luck
__________________
Stephen -- Man vs. Tile -- The Battle Continues . . .
pooky is offline   Reply With Quote
Old 08-25-2009, 08:36 AM   #6
Marct
Registered User
 
Marct's Avatar
 
Join Date: Aug 2009
Posts: 106
Hey, Thank you all for the kind response's.
__________________
Marc
www.apileoftile.com
Marct is offline   Reply With Quote
Old 08-26-2009, 01:54 AM   #7
tracy d
Registered User
 
tracy d's Avatar
 
Join Date: Dec 2008
Location: SW CO
Posts: 418
WOW! That's really awesome stuff you have there! I think there is more of a market than some folks might think!! That is a true artform that some people are definitely willing to pay for! I would go one step farther and take some of your work around to kitchen design centers and tile places, architects, builders, etc. Keep it up, it is beautiful! (And visit the Professionals Site!)
__________________
The Grams...tracy d.
tracy d is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
tile inlay on wood canoerat Tile Forum/Advice Board 5 06-01-2009 10:45 PM
glass tile inlay JoeC Professionals' Hangout 5 06-24-2007 09:57 PM
mosaic inlay vart Tile Forum/Advice Board 4 08-26-2006 10:06 AM
granite inlay get level Tile Forum/Advice Board 2 03-31-2005 09:01 AM
wood inlay against tile skyshark Tile Forum/Advice Board 2 09-28-2004 07:13 AM


All times are GMT -6. The time now is 12:04 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC