Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Found usc_block_11 empty, added this: [CODE] [/CODE]
Sponsors


Reply
 
Thread Tools Search this Thread
Old 10-15-2018, 01:29 PM   #1
Just In Tile LLC
Registered User
 
Just In Tile LLC's Avatar
 
Join Date: Sep 2015
Location: East Texas
Posts: 937
Copper drain to PVC clamping drain

Whatcha y’all think about this setup... thinking a plumber should handle this one.
Attached Images
 
__________________
Justin
"Being world class means knowing you're good, but never satisfied you're good enough"
Just In Tile LLC is online now   Reply With Quote
Sponsored Links
Old 10-15-2018, 02:15 PM   #2
Davy
Moderator -- Mud Man
 
Davy's Avatar
 
Join Date: Jan 2003
Location: Princeton,Tx.- Dallas area
Posts: 30,483
I probably wouldn't fool with it unless I didn't have anything better to do. Is this residential?
__________________
Davy

www.davystephenstile.com
Davy is offline   Reply With Quote
Old 10-15-2018, 02:55 PM   #3
Just In Tile LLC
Registered User
 
Just In Tile LLC's Avatar
 
Join Date: Sep 2015
Location: East Texas
Posts: 937
Sure is Davy, old home and outta city limits concrete is poured all the way around the pipe. A boot does fit snug on it to join it, just have to raise the dam higher than I want to make that work.
__________________
Justin
"Being world class means knowing you're good, but never satisfied you're good enough"
Just In Tile LLC is online now   Reply With Quote
Old 10-15-2018, 03:25 PM   #4
wwhitney
Registered User
 
Join Date: Dec 2015
Location: Berkeley, CA
Posts: 1,028
I think 3 piece clamping ring drains are available with either a 2" spigot outlet (a no hub drain) or a 2" FIP outlet? Possibly in cast iron instead of plastic.

In the first case you could just connect the drain directly to the copper pipe with a Mission CK-22 coupling or equivalent. Or in the second case, you could solder a 2" copper x MIP adapter onto your copper stub.

Cheers, Wayne
__________________
Wayne
wwhitney is online now   Reply With Quote
Old 10-15-2018, 08:21 PM   #5
smifwal
Registered User
 
Join Date: Mar 2016
Location: Kansas City
Posts: 717
I know this one. You only need the depth of the no-hub to connect to, so you could cut some of that pipe off that would get you another inch or so. Or if you want to go lower then carefully chip away some more concrete. And you can't use just any old no hub from HD or Lowe's unluss your Lowe's is awesome and carries them, mine is not. I tried to use one from the depot once on a copper toilet pipe felt just like normal torqued her down to 60lbs and dam if it didn't leak.
Attached Images
 
__________________
Shawn
smifwal is online now   Reply With Quote
Old 10-16-2018, 12:11 AM   #6
Tool Guy - Kg
Moderator -- Wisconsin Kitchen & Bath Remodeler
 
Tool Guy - Kg's Avatar
 
Join Date: Feb 2005
Location: Oak Creek, WI
Posts: 20,581
Quote:
Originally Posted by Just In Tile LLC
...and outta city limits
Tool Guy - Kg is offline   Reply With Quote
Old 10-17-2018, 05:37 AM   #7
Just In Tile LLC
Registered User
 
Just In Tile LLC's Avatar
 
Join Date: Sep 2015
Location: East Texas
Posts: 937
We went with the CK-22 Wayne which is pretty much that connector you posted Shawn.

Outta the city limits is always fun, it's a crap shoot on what you'll find, but also helpful when you overflow into other trades, which leads to a crapshoot on what the next guy finds.... the cycle of trade life.
__________________
Justin
"Being world class means knowing you're good, but never satisfied you're good enough"
Just In Tile LLC is online now   Reply With Quote
Old 10-17-2018, 06:54 AM   #8
Davy
Moderator -- Mud Man
 
Davy's Avatar
 
Join Date: Jan 2003
Location: Princeton,Tx.- Dallas area
Posts: 30,483
Inside the city limits too.
__________________
Davy

www.davystephenstile.com
Davy is offline   Reply With Quote
Old 10-17-2018, 08:37 AM   #9
wwhitney
Registered User
 
Join Date: Dec 2015
Location: Berkeley, CA
Posts: 1,028
So did you go with a standard hub outlet drain plus a short nipple, or did you find a spigot outlet drain?

Cheers, Wayne
__________________
Wayne
wwhitney is online now   Reply With Quote
Old 10-17-2018, 02:52 PM   #10
Just In Tile LLC
Registered User
 
Just In Tile LLC's Avatar
 
Join Date: Sep 2015
Location: East Texas
Posts: 937
Had to do the short nipple route. A higher dam but they are flipping the house and weren’t too concerned about it.
__________________
Justin
"Being world class means knowing you're good, but never satisfied you're good enough"
Just In Tile LLC is online now   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
clamping drain and kerdi? WilliamL Professionals' Hangout 12 11-14-2004 08:29 PM
Difficult Kerdi drain connection vs. cast iron clamping drain alember Tile Forum/Advice Board 11 04-06-2004 04:40 PM
clamping drain Pat R Tile Forum/Advice Board 16 06-18-2002 06:11 PM
clamping drain for tub william hendry Professionals' Hangout 19 03-04-2002 07:05 AM


All times are GMT -6. The time now is 06:32 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC