Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 10-04-2006, 12:43 PM   #1
apcolor
Registered User
 
Join Date: Oct 2006
Location: Brooklyn NY
Posts: 1
Floor Prep for Ceramic Tile

I wish to install ceramic tile in a kitchen that has a 3/4" thick tong and grove wood floor. The floor and joists are basically in good condition, except for two details.

1. When I removed a parquet floor covering, I discovered a strange situation. It seems that plumbers, rater than core through a joist, ran a pipe up, over and down the joist, thus creating a 3" by 3" void on the floor to clear the pipe. There is now the question of whether I may "bridge" this void with 1/4" cement board or do I have to install 1/2" or 3/4" plywood and 1/4" cement board over the 3/4" tong and grove floor as a base for a tile floor covering. I like to accomplish the job with as low a step as possible between rooms.

2. The floor is not level. In order to help level the floor I will need to "feather in" some additional thin-set to fill the low points in the floor (about 1/2" to 1" maximum thickness). May I add this extra material below the cement board or is it best on top of the cement board? I do not want a "mud job" because I wish to have as low a step as possible between rooms.
apcolor is offline   Reply With Quote
Sponsored Links
Unread 10-04-2006, 03:24 PM   #2
John Bridge
Mudmeister
 
Join Date: Mar 2001
Location: Rosanky, Texas
Posts: 68,340
Send a message via AIM to John Bridge
Welcome aboard, Ap. Please give us a first name.

Your best bet is to post pictures. I will say that 1/4 in. backer board won't bridge much of anything. It needs solid backing beneath.

You will need to know the size, spacing and span of your joists so you can run them through our deflecto.
John Bridge is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:58 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC