Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 12-01-2001, 07:15 PM   #1
Erich
Registered User
 
Join Date: Nov 2001
Posts: 9
This might be a stupid question but... How far do you hang the bullnose tile edge off the edge of what you are tiling.
Is it just enough for the thickness of the tile or the tile thickness plus the mortar? And if the latter is true than what should the thickness of the mortar be. ( I am tiling a front porch with 13 x 13 tile , if that helps )

Erich is offline   Reply With Quote
Sponsored Links
Unread 12-01-2001, 07:49 PM   #2
Rob Z
Guest
 
Posts: n/a
Hi Erich

good question...Yes, allow for the thickness of the tile plus thinset. The thickness will vary depending on the tile, trowel, and substrate. Your best bet is to install the vertical pieces first, and then run the bullnose and floor tile from there.
  Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:36 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC