Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 01-28-2009, 03:04 PM   #16
quackattack99
Registered User
 
Join Date: Jan 2009
Posts: 11
George---thanks for the information. I assume you rented one of these and was it the first time you used one? Is it very hard to use?

Thanks.....
__________________
GB
quackattack99 is offline   Reply With Quote
Unread 01-29-2009, 12:41 PM   #17
cx
Moderator emeritus
 
cx's Avatar
 
Join Date: Jul 2001
Location: Boerne, Texas
Posts: 91,816
I use a diamond "cup wheel" on an angle grinder for the purpose, GB. I assure you it's not gonna "only polish the surface."

And it doesn't really take long to rough up a pretty large area. Dust is the biggest drawback, but ain't nobody promised you easy, eh?

My opinion; worth price charged.
__________________
CX

Y'ALL NEW VISITORS READ THIS HERE!
cx is online now   Reply With Quote
Unread 01-29-2009, 05:45 PM   #18
George K
Registered User
 
Join Date: Jan 2005
Location: Baltimore County, Maryland
Posts: 250
I bought the scarifier on e-bay. I'm finished with it now and I will eventually get around to selling it. No it was not hard to use, but it was not an easy job (1300 sq. ft.). I still had to use an angle grinder near the walls where the machine would not reach. I tried to use a rented dual disk electric concrete grinder. Four hours later I had removed maybe a 1/32" from about 10 sq. ft.
I was not impressed. The dual disk grinder came with new diamond blocks on it too.

The electric scarifier definitely roughed up the surface of my sealed concrete basement floor. I vented the dust to the outside and the dust cloud looked like the house was on fire I was also able to take down some high spots on the slab using the scarifier.

The angle iron rails in the picture are not necessary, but were part of an experiment to precision level a high spot. It was easier to just grind back and forth in multiple directions in order to take down the high spot.
Attached Images
 
__________________
George K.
George K is offline   Reply With Quote
Unread 01-29-2009, 06:48 PM   #19
Tool Guy - Kg
Moderator -- Wisconsin Kitchen & Bath Remodeler
 
Tool Guy - Kg's Avatar
 
Join Date: Feb 2005
Location: Oak Creek, WI
Posts: 22,341
George, they have child labor laws! Well, at least he's properly protected with the glasses/gloves/ ear muffs....

I use this Bosch 1773 concrete surface grinder. When hooked up to a decent shop vac with a fine filter, there's practically zero dust. Like mentioned, it doesn't take much time at all. The HD's around here used to rent them, but stopped. It would be worth a call to your local HD's.
Attached Images
 
__________________
Tonto Goldstein... but my friends call me Bubba

Help an awesome summer camp!

Last edited by Tool Guy - Kg; 01-29-2009 at 06:53 PM.
Tool Guy - Kg is offline   Reply With Quote
Unread 01-30-2009, 10:01 AM   #20
quackattack99
Registered User
 
Join Date: Jan 2009
Posts: 11
Thank you all for all the great info! I really appreciate it!
__________________
GB
quackattack99 is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Multi-room Multi-substrate Tile Job Jerry Wannabe Tiler Tile Forum/Advice Board 5 11-13-2007 11:47 PM
Tile in "wet" basement? Eric Gibbs Tile Forum/Advice Board 4 07-14-2006 02:38 PM
Ditra/porcelain/unmodified vs modified thinset Jeff_kitchen Tile Forum/Advice Board 312 10-19-2005 10:29 AM
Tile over old tile or remove old tile? Setter Wannabe Tile Forum/Advice Board 6 05-11-2004 11:59 AM


All times are GMT -6. The time now is 12:22 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC