Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 12-17-2014, 09:31 AM   #1
Shane72
-Shane
 
Join Date: Mar 2004
Location: Peoria, IL
Posts: 12
Advice on finishing off this tiled edge?

I have a bathroom shower that was tiled for me, and the tile guy ended up leaving a "raw edge" around the outside of the shower-- see attached images. There's one of the shower as a whole and then a close up of the "raw edge". We thought after the room was painted that this edge wouldn't bother us, but it does.

I'm now unsure on how to finish this off so it looks nice. Since this stone is tumbled, placing a full tile all the way around wouldn't really lay evenly, so I'm really at a loss here. Maybe since the finishes are/will be brushed nickel, is there some sort of brushed nickel "trim" that we could do around the three edges? Any suggestions/advice would be GREATLY appreciated!

Link to shower image

Link to close up of tiled edge
Shane72 is offline   Reply With Quote
Sponsored Links
Unread 12-17-2014, 09:37 AM   #2
Houston Remodeler
Pondering retirement daily

STAR Senior Contributor

 
Houston Remodeler's Avatar
 
Join Date: Oct 2009
Location: Houston Texas
Posts: 28,201
If the tiles are waaay out of plumb, I'd grind / cut the ends of the jamb tiles so they are flush, then add tiles to the outside face of the shower.

If they are flush enough so the grout hides the uneven-ness, then tile the outside face and grout it closed.

I'd also waterproof the area outside the shower around the curb. That area usually takes it on the chin.
__________________
Paul1

For when DIY isn't such a good idea...
Houston TX area Kitchen & Bath Remodeling


http://CabotAndRowe.com
Houston Remodeler is offline   Reply With Quote
Unread 12-17-2014, 10:48 AM   #3
cx
Moderator emeritus
 
cx's Avatar
 
Join Date: Jul 2001
Location: Boerne, Texas
Posts: 89,831
Welcome back, Shane.

Please post your photos as attachments using the paper-clip icon above the Reply dialog box so they'll appear in your post permanently rather than posting links that are likely to disappear later when changes are made to your third party storage site. Thanks.
__________________
CX

Y'ALL NEW VISITORS READ THIS HERE!
cx is online now   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tile Edge Finishing RockinFX Tile Forum/Advice Board 11 10-26-2013 08:13 PM
finishing tub edge Plumb Crazy Purple Tile Forum/Advice Board 8 09-16-2010 01:24 AM
Finishing Non-tiled CBU mikeln Tile Forum/Advice Board 5 08-18-2006 09:43 PM
advice finishing corner between new tub and non-tiled wall skiadct Tile Forum/Advice Board 1 07-10-2006 09:16 PM
Finishing to a curved edge. EasyPete Tile Forum/Advice Board 5 11-05-2005 01:42 PM


All times are GMT -6. The time now is 03:28 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC