Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 01-22-2007, 10:22 AM   #1
Dpsinghx
Registered User
 
Join Date: Nov 2006
Location: Portland, OR
Posts: 6
Question Grey fluffy wall insulation - Asbestos?

Behind the plaster & lathe on the exterior walls of my 1932 Portland,OR bungalo is grey fluffy (feels like baled cotton) insulation. Anybody know what this stuff is?

Thanks,
Dave
Dpsinghx is offline   Reply With Quote
Sponsored Links
Unread 01-22-2007, 10:31 AM   #2
Splinter
Kitchen & Bath Remodeler Long Island
 
Splinter's Avatar
 
Join Date: Sep 2003
Location: Long Island, NY
Posts: 2,145
probably rockwool, a mineral wool insulation... Not sure about any asbestos content however....
__________________
Alex
Splinter is offline   Reply With Quote
Unread 01-22-2007, 11:04 AM   #3
Dpsinghx
Registered User
 
Join Date: Nov 2006
Location: Portland, OR
Posts: 6
Also, it's loose - blown in (not a roll or panel); if that helps...
Dpsinghx is offline   Reply With Quote
Unread 01-22-2007, 12:21 PM   #4
MudMaker
The Revolution has begun/Make America Great Again
 
MudMaker's Avatar
 
Join Date: Jan 2006
Location: Centerville, Ohio
Posts: 8,306
It's kinda hard to guess what it may be. Could be RockWool like Alex said. Could be paper too - during the 70's people put a treated paper in as insulation. Take a picher of it and we'll try to guess..
I don't know what they put in - in the 30's. I was'nt here yet...
__________________
mm (aka "Paco")
MudMaker is offline   Reply With Quote
Unread 01-22-2007, 12:26 PM   #5
JTG
Registered User
 
JTG's Avatar
 
Join Date: Nov 2002
Location: Ballard, WA
Posts: 4,495
I have always pulled this stuff out of the walls and replaced with bat insullation. Never wondered if it had asbestos in it. If you really need to know you can get it test (usually for under $50.00) Look in the phone book for testing labs. Ask them and they might now if insullation has asbestos in it.
Good Luck
JTG
__________________
Jerry

Santa Seattle
Ballard

http://www.facebook.com/home.php#!/SantaJerryinBallard
JTG is offline   Reply With Quote
Unread 01-22-2007, 12:32 PM   #6
dgunnels
Neesie
 
dgunnels's Avatar
 
Join Date: May 2006
Location: Full Time RVer
Posts: 2,428
I would be willing to bet a yes on the asbestos. The insulation you are describing was commonly used around here in attics during the 50 and 60s. When we had the big flood in 94 it was a nesty mess to deal with. We didn't ahve time to worry about the content at the time, just had to fix things ASAP.
__________________
Neesie

Denise Gunnels, Realtor

http://www.harrynorman.com/agents/17291-Denise-Gunnels
dgunnels is offline   Reply With Quote
Unread 01-22-2007, 06:22 PM   #7
SteveVB
Remodeler -- D.C. Area
 
Join Date: Oct 2006
Location: Near DC
Posts: 630
It could be cellulose, a common blown in product if its really fluffy. If its recent it could actually be cotton.
If its itchy like fiberglass then its probably a mineral wool product like rockwool which I dont think contain asbestos.
The only Asbsestos containing insulation I know about is vermiculites.
Ive had a handful of blown products tested over the years and never had an asbestos positive come back. Everyone gets everything tested these days so a local lab shouldnt be hard to find- not so easy 10 years ago until Radon came along.

If you are sensitive to fiberglass then a respirator, goggles and some tyvek would be a good idea. I would seal the room from the house and add some positive ventilation. Keep the kids away.

Construction is a dirty and dangerous business...
__________________
Steve

Have Fun
SteveVB is offline   Reply With Quote
Unread 01-22-2007, 06:27 PM   #8
Forry
Registered User
 
Join Date: Jan 2007
Location: Eugene, OR
Posts: 231
Sounds like cellulose. See tons of the stuff around this area. It's basically recycled newspaper I believe treated with flame retardent and blown in inthe 70's and 80's. No asbestos, but sticks in your nose real good if you don't use a dust mask. A shop vac works real good to get it out of the walls... I've used garbage bags IN the shop vac to make it easier.
__________________
Forrest Castile
Castile Construction, Inc.
Forry is offline   Reply With Quote
Unread 01-23-2007, 01:14 PM   #9
sandbagger
Registered User
 
sandbagger's Avatar
 
Join Date: Mar 2005
Location: Tucson, AZ
Posts: 5,383
garbage bags in the Shop-Vac? seems to me you'd have to rig it so you'd get air flow.

I prefer either the yellow high-efficiency bags or regular bags with high efficiency filter. The latter is cheaper in the long run. There is a Goretex filter for about $30 that can be cleaned and re-used. wet or dry.
__________________
-art-
__________________________

"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government -- lest it come to dominate our lives and interests."

Patrick Henry
sandbagger is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:30 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC