Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
 
Thread Tools Search this Thread
Old 02-18-2019, 11:28 AM   #1
pls
Registered User
 
Join Date: Feb 2019
Location: Maryland
Posts: 4
Self-leveling pour is not flat

I am redoing a powder room. It is only 24 sqft. The floor is not flat (maybe 1/4 in from highest to lowest spots) so I decided to use a leveling compound. I screwed plywood to the the subfloor, applied the primer, let it dry and then poured the self leveler. I used Mapei Self-Leveler Plus and used the high end for recommended amount of water. I poured out about 3/4 of a bucket and pushed it around until it looked even and then I went over it with a blade. When I was done it looked perfect, surface was very smooth. As soon as it was dry enough I put a level on it and the high spots were still high. I probably got rid of half of the variation but I am disappointed in my results. Any suggestions on what I might have done wrong?
Thanks
Phil
__________________
Phil
pls is offline   Reply With Quote
Sponsored Links
Old 02-18-2019, 12:10 PM   #2
Gozo
Registered User
 
Join Date: Oct 2016
Location: Central Virginia
Posts: 366
You can use a rub stone to reduce the high spots. SLC isnít designed to be a wear surface, so itís softer than regular cement. For an area that size, it shouldnít take too long.
__________________
Jeff
Gozo is offline   Reply With Quote
Old 02-18-2019, 02:48 PM   #3
jadnashua
Veteran DIYer- Schluterville Graduate

STAR Senior Contributor

 
Join Date: Jul 2004
Location: Nashua, NH
Posts: 12,836
Surface tension will tend to follow the variations in the floor unless it is deep enough. Many of them want at least 1/2" over the top of the highest point on a wooden subfloor. You can do it with less, but it takes more skill.

IMHO, they shouldn't call the stuff 'self-leveling'. Keep in mind, even water isn't exactly a flat surface as can be seen from a droplet on a freshly waxed car.
__________________
Jim DeBruycker
Not a pro, multiple Schluter Workshops (Schluterville and 2013 and 2014 at Schluter Headquarters), Mapei Training 2014, Laticrete Workshop 2014, Custom Building Products Workshop 2015, and Longtime Forum Participant.
jadnashua is offline   Reply With Quote
Old 02-22-2019, 06:03 PM   #4
ryanfornkohl
Ryan
 
Join Date: Feb 2019
Posts: 3
Lol a rub stone. I bought a 7" grinder with diamond blade attachment and gave up. I poured SLC and had the same problem in a 25sf bathroom. Ended up breaking it all back out and leveling the joists with shims and plywood. Good luck.
__________________
ryan
ryanfornkohl is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Small Floor -> Large Tile and How Flat is Flat? Eldudarino Tile Forum/Advice Board 9 09-23-2016 12:53 PM
flat leveling system or curved bottom? 7777gjones Tile Forum/Advice Board 7 03-16-2016 09:48 PM
How flat is flat? Filling in subfloor dips RDS Tile Forum/Advice Board 2 06-08-2011 02:18 PM
best way to tell if floor is level/flat-and other flat surface issues!? acid Tile Forum/Advice Board 9 05-12-2005 10:32 PM
The Great Self-leveling Cement Pour John Bridge The Mud Box 5 05-25-2002 08:29 PM


All times are GMT -6. The time now is 07:06 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC