Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet

Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board


Thread Tools Search this Thread
Unread 08-10-2010, 05:51 PM   #1
Registered User
Join Date: Jan 2010
Location: Sherbrooke, Quebec, Canada
Posts: 32
Metal edge profile

The ceiling in my entry hall is 10' 4" high at its highest point.

I am installing ceramic tile on the angle formed by the closet and the wall separating the hallway from the living room (32" X 36").

Is there any brushed aluminium edge profile available in long enough sections to have a single piece at the edges of this L shape?

If not, what is the neatest way of making the joint as invisible as possible?


pbb is offline   Reply With Quote
Sponsored Links
Unread 08-10-2010, 05:58 PM   #2
Houston Remodeler
Pondering retirement daily

STAR Senior Contributor

Houston Remodeler's Avatar
Join Date: Oct 2009
Location: Houston Texas
Posts: 28,236

Most of the profile pieces I am aware of are a little over 8 feet / 2 meters long. Butted together, 8+ feet above the floor, no one will see the hairline joint. If they do, they medication and a support group

You can always have one custom made...

For when DIY isn't such a good idea...
Houston TX area Kitchen & Bath Remodeling

Houston Remodeler is offline   Reply With Quote

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
matching Schluter edge profile, stainless Grasshopper Tile Forum/Advice Board 4 07-07-2010 11:02 PM
Split Face edge profile on Lagos Gold 1 1/4" Limestone Slab lburkholder Professionals' Hangout 1 08-27-2009 04:01 PM
3cm Granite Slab Edge Profile Transition Frank Tile Forum/Advice Board 6 02-03-2005 08:06 PM
Finishing metal transition edge - caulk or grout Mitch_Skool Tile Forum/Advice Board 2 04-23-2004 02:55 PM
HD metal edge cap for listelle backsplash? Twiddly Tile Forum/Advice Board 1 04-26-2003 03:20 PM

All times are GMT -6. The time now is 06:50 PM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC