Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 09-16-2022, 11:35 AM   #1
atvkid4eva
Registered User
 
Join Date: Sep 2022
Posts: 1
Which Thinset wall/floor

I am doing my first tile job in a bathroom remodel. The alcove tub surround will be 4x12 subway tiles and I will be using Kerdi Board as a backer. The floor tile will be 12x24" Porcelain tile. I want a high quality Thin-set for both applications. I've read good stuff about Ardex thin set and various others, Is there one thin set that has no sag for the wall and can still be used on the floor?

Please recommend me either one thin set for both applications or one for each.

Thanks!
__________________
Bobby
atvkid4eva is offline   Reply With Quote
Sponsored Links
Unread 09-16-2022, 04:32 PM   #2
Davy
Moderator -- Mud Man
 
Davy's Avatar
 
Join Date: Jan 2003
Location: Princeton,Tx.- Dallas area
Posts: 34,191
Bobby, I wouldn't worry about the "non sag" claim. Some thinsets are pretty good at holding tiles in place but I would still plan to use wedges or spacers on the walls. Throw that out and you have a lot of thinsets to choose from. Versabond LFT is a good one and so is Prolite. Home Depot has both along with a few others.
__________________
Davy

www.davystephenstile.com
Davy is offline   Reply With Quote
Unread 09-20-2022, 09:30 PM   #3
Snets
Professional Weekend Warrior
 
Snets's Avatar
 
Join Date: Dec 2008
Location: Northern California
Posts: 667
4X12's are pretty light, I'd not worry about sag, assuming you will be using some spacers. if you mix thinset mortar to the instructions, it will hold a small tile like that very well on a wall, especially when you achieve full mortar coverage - which you should - and that is only achieved by walking that tile back and forth, compressing the ridges of the trowel notches fully.
Snets is offline   Reply With Quote
Unread 09-24-2022, 09:59 AM   #4
Tiger Mountain Tile Inc
Registered Muser
 
Tiger Mountain Tile Inc's Avatar
 
Join Date: Feb 2011
Location: Issaquah, Washington
Posts: 7,322
If you are using Kerdi and you can get your hands on Schluter All-Set then that would be a good choice.
__________________
James Upton
How-to mix a small batch of thinset perfectly, every time.
Tiger Mountain Tile Inc is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mapei Thinset Advice Sought - Restrooms Floor and Wall ranchopedro Tile Forum/Advice Board 10 12-30-2020 12:44 PM
Wall/floor & wall/wall connections for foam panels westydog Tile Forum/Advice Board 3 08-04-2020 04:09 PM
premixed thinset vs. actual thinset mortar on floor Steve in Liberty Tile Forum/Advice Board 7 11-03-2009 11:40 AM
Thinset, grout, or Silicon at floor/wall transition? Mike D Tile Forum/Advice Board 1 02-19-2009 07:21 AM
Concrete floor, plaster wall, concrete backboard: Thinset(s)? Laine MacTague Tile Forum/Advice Board 5 04-13-2006 09:13 PM


All times are GMT -6. The time now is 09:18 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC