Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 03-09-2020, 01:02 PM   #1
swindmill
Registered User
 
Join Date: May 2013
Posts: 54
Pans for LFT tub surround

*Plans

I’m about to start a tub surround and want to run my plans by some experts before I start. I’ve done a few walk in showers, a few tub surrounds, and quite a few floors. This is my first LFT on walls. This is my house.

Tiles are 12”x24” porcelain. Walls are 1/2” Hardie, and appear to be very flat. Back wall is 59”. Tub is 36”, so end walls will be ~39”. I’m using Mapei ultra flex LFT mortar with a 1/2” square notch trowel. I will skim back side of tile. Ceiling is 99” from tub deck, so Ill start with a ledger board at 7-8”. The first tile will start at the center line of the back wall and I’ll fold them around the end walls using a 1/3 overlap pattern. Spacers will be 3/16”, as I prefer to play it safe here.

Any errors in my thinking here?
__________________
Jay
swindmill is offline   Reply With Quote
Sponsored Links
Unread 03-09-2020, 03:35 PM   #2
ss3964spd
Moderator
 
ss3964spd's Avatar
 
Join Date: Jul 2005
Location: Fairfax, Va
Posts: 2,973
Send a message via Yahoo to ss3964spd
Sounds solid, Jay, but if the walls are pretty darn flat you might consider a 3/8" slant notch trowel. The slant notch lets the ridges fall over into the voids easier, and less mortar means reduced chance of squeeze out into the grout joints.

I used the same 3/8" SL trowel for my walls and floor, both have 12X24's (except the shower floor).

What's your water proofing?
__________________
Dan
---------------------------------------------------------------------------------
If I recall correctly my memory is excellent, but my ability to access it is intermittent.

Last edited by ss3964spd; 03-09-2020 at 04:18 PM. Reason: Spelling...
ss3964spd is offline   Reply With Quote
Unread 03-09-2020, 04:14 PM   #3
swindmill
Registered User
 
Join Date: May 2013
Posts: 54
I’ll grab one of those trowels. Waterproofing is Mapei Aqua Defense.
__________________
Jay
swindmill is offline   Reply With Quote
Unread 03-14-2020, 12:09 PM   #4
Tiger Mountain Tile Inc
Registered Muser
 
Tiger Mountain Tile Inc's Avatar
 
Join Date: Feb 2011
Location: Issaquah, Washington
Posts: 6,789
Just how I would do it.

Name:  2015-07-13 13.55.58.jpg
Views: 105
Size:  53.1 KB

Name:  2015-07-13 13.52.06.jpg
Views: 105
Size:  72.6 KB
__________________
Jim Upton

Curious how the new Delta Cruzer tile saw stacks up against Dewalt? Check out the full review and video on DIYTileGuy
Tiger Mountain Tile Inc is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Question about mud pans tyson323 Tile Forum/Advice Board 7 07-11-2012 09:53 PM
mud shower pans unionmandan Tile Forum/Advice Board 3 12-23-2009 10:04 PM
Shower Pans kf6cmp Tile Forum/Advice Board 5 12-07-2006 02:15 PM
I'm sorry, but it's shower pans again ShelleyinNM Tile Forum/Advice Board 13 03-04-2003 08:33 PM
Shower pans Matt Clark Tile Forum/Advice Board 8 07-29-2002 04:55 PM


All times are GMT -6. The time now is 02:18 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC