Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 11-04-2004, 01:24 AM   #1
Todd L
Guest
 
Posts: n/a
Granite Countertop, No grout, What to seal with?

I recently built a granite tile counter top using 12x12 Tibetian Blue tiles - about 70 of them. First time for me. Used 3/4 15 layer aircraft ply base
6 mil vapor bar, mud bed, and 1/2 hardi-backer - acording to the 3 different
books I found at the library here in denton, tx. I secured the tiles using
flexbond thinset with latex additive, in one place and siliconized adhesive
caulk on another section to try the two different methods. I found the
caulk a lot faster, but much less forgiving when it came to making small adjustments. One thing I think I did wrong was not putting any space
between the tiles for grout. Most of the joints are flush together, but
in a few places, there is about 1/100 to 1/32 in gap. What is the best
way to seal these gaps? Another question I had was whether the
Tibetian blue is considered a green granite requiring epoxy thinset?
Any help would be appreciated.
Todd
  Reply With Quote
Sponsored Links
Unread 11-04-2004, 05:29 AM   #2
Davestone
Florida Tile & Stone Man
 
Join Date: Apr 2004
Location: Naples Fl.
Posts: 22,690
If it's granite and not marble,you probably don't need epoxy,but i'm not certain, i've never used it.There should be a slight bevel on the sides of the pieces?The problem with the caulk, is it's too flexing,and if you grout those pieces it will probably break out,so i would use color caulk,or remove and thinset those pieces back.
__________________
Dave



http://Davestonestile.com
Davestone is offline   Reply With Quote
Unread 11-04-2004, 01:02 PM   #3
rtl_airfoil
Registered User
 
Join Date: Nov 2004
Location: denton,tx
Posts: 3
Its granite

thanks, Yes dave it has a bevel to the edges. As for pulling up the tile I did that for one piece that had settled too low and ended up having to break it up and tear it off the hardi backer. the siliconized caulk held it real good.
rtl_airfoil is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:36 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC