Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 10-25-2020, 05:30 PM   #1
jamfalcon
Registered User
 
Join Date: Oct 2020
Posts: 2
1" Hexagon Trowl Size?

Greetings!

I am moving right along with our bathroom remodel but have hit a question where I have been unable to find consistent guidance.

The floor I am installing will be 1" hexagon tiles, 1/4 inch thick with 1/8 inch grout joints. I have been unable to find consensus on an appropriate trowel to use for these tiles, between a 3/16th V-notch, and 1/4 square trowel.

I am looking to avoid squeeze out as much as possible to avoid any needless cleanup and misery, however, I worry that the 3/16 notch may not provide adequate coverage.

Your input is greatly appreciated. Many thanks!
__________________
Josh
jamfalcon is offline   Reply With Quote
Sponsored Links
Unread 10-25-2020, 05:41 PM   #2
Davy
Moderator -- Mud Man
 
Davy's Avatar
 
Join Date: Jan 2003
Location: Princeton,Tx.- Dallas area
Posts: 32,885
I usually use a 3/16 V notch with 1 inch hex.
__________________
Davy

www.davystephenstile.com
Davy is offline   Reply With Quote
Unread 10-26-2020, 12:21 AM   #3
Tool Guy - Kg
Moderator -- Wisconsin Kitchen & Bath Remodeler
 
Tool Guy - Kg's Avatar
 
Join Date: Feb 2005
Location: Oak Creek, WI
Posts: 22,167
Welcome to the forum, Josh.

I agree with Davy. If you use that 1/4” square-notch, the mortar will be oozing out of the joints way too much.

Have you had a chance to properly prepare the substrate so that you’re installing over a nice, flat surface?

__________________
Tonto Goldstein... but my friends call me Bubba

Help an awesome summer camp!
Tool Guy - Kg is offline   Reply With Quote
Unread 10-26-2020, 06:11 PM   #4
jamfalcon
Registered User
 
Join Date: Oct 2020
Posts: 2
Thank you both.

The substrate is level save for the shower pitch. Everything is waterproofed and ready for tile... was just questioning the amount of mortar to use. Thanks again!
__________________
Josh
jamfalcon is offline   Reply With Quote
Unread 10-26-2020, 06:29 PM   #5
Kman
Moderator
 
Kman's Avatar
 
Join Date: Nov 2006
Location: NW Arkansas, Ozark Mountains
Posts: 11,635
One of the mistakes I see is that people allow the mortar to dry a little bit on the trowel, particularly on the teeth. As this happens, the notch will get more and more shallow, resulting in less coverage.

So I would spread some, then clean the trowel off completely, making sure the notches are clean to get the best coverage.
__________________
Kevin

The top ten reasons to procrastinate:

1.
Kman is online now   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Trowel Size for Hexagon Tiles steamedhomer Tile Forum/Advice Board 9 10-24-2019 06:09 AM
1" Hexagon Flooring bugme Tile Forum/Advice Board 14 09-22-2010 10:53 PM
1" Hexagon Tiles "Re" Grout? jennat Tile Forum/Advice Board 1 06-30-2007 08:54 PM
Trowl Size diverdown2000 Tile Forum/Advice Board 3 05-14-2005 10:13 AM
Easy trowl size question metzler000 Tile Forum/Advice Board 1 07-07-2004 09:41 AM


All times are GMT -6. The time now is 10:56 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC