Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
 
Thread Tools Search this Thread
Old 06-21-2018, 08:45 AM   #1
C@TCH
Registered User
 
Join Date: Feb 2013
Posts: 7
Layout 12 x 24 tiles

Hi guys, Im about to renovate my bathroom and installing 12x24 tiles stacked in shower, they are a bit bowed so dont want a brick pattern.
My walls are left and right 49 and back wall 35
My question is where do I start or lay them out to get biggest possible pieces without leaving a 3 piecein the corner.
Any help appreciated.
Thanks
__________________
Ermanno
C@TCH is offline   Reply With Quote
Sponsored Links
Old 06-21-2018, 09:34 AM   #2
Houston Remodeler
Pondering retirement daily

STAR Senior Contributor

 
Houston Remodeler's Avatar
 
Join Date: Oct 2009
Location: Houston Texas
Posts: 27,819
We always do what Mrs Ermano wants

Instead of a 3 incher above and a 15 incher below, slide the while pattern over 1/4 tile (or 6 inches in your case) to have a 9 incher above and a 21 incher below.
__________________
Paul1

For when DIY isn't such a good idea...
Houston TX area Kitchen & Bath Remodeling


http://CabotAndRowe.com
Houston Remodeler is offline   Reply With Quote
Old 06-21-2018, 02:20 PM   #3
workhurts
Registered User
 
Join Date: Jan 2009
Posts: 254
Where's the 3" coming from?

Where's the above and below coming from?

On the 49" wall, wouldn't a full tile in the middle give you 25" remaining and you do 12.5" on either side?

On the 35" wall, a full tile in the middle gives you 11" remaining which means a 5.5" tile on either side. Not saying that how to do it but isn't the math? So not sure where all these other numbers are coming from.

Unless you meant stacked the other way, but even then you get 3 tiles across that 35" wall. On the 49" wall you could center the tile, giving you 18.5" on either side which would be a tile and a half.

Maybe I'm just misunderstanding the question.
__________________
Ali
workhurts is offline   Reply With Quote
Old 06-21-2018, 09:55 PM   #4
C@TCH
Registered User
 
Join Date: Feb 2013
Posts: 7
Guess thats the best way to go, I was hoping to get as many full tiles as possible on the walls. Thanks
__________________
Ermanno
C@TCH is offline   Reply With Quote
Old 06-21-2018, 11:40 PM   #5
Shady at Best
Tyrone shoelaces
 
Shady at Best's Avatar
 
Join Date: Apr 2014
Location: Sacramento, ca
Posts: 541
I am assuming you are going horizontally? Have you considered running them veritcally?

Sent from my SM-G935V using Tapatalk
__________________
Travis

It's just a clever handle.
Shady at Best is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Need suggestions for layout of 9x12 tiles in my shower? joe979xx Tile Forum/Advice Board 4 05-01-2018 09:05 AM
How to layout tiles? Chester Kaup Tile Forum/Advice Board 3 01-03-2018 07:14 PM
Pattern layout and the cut tiles JPeter Tile Forum/Advice Board 2 04-26-2010 01:54 PM
layout sequence for different tiles on one floor. krisdw Tile Forum/Advice Board 2 10-05-2005 04:24 PM
Wrapping Tiles in a Layout DreamQueen Tile Forum/Advice Board 9 11-03-2004 09:09 PM


All times are GMT -6. The time now is 04:14 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC