Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Professionals' Hangout

Sponsors


Reply
Thread Tools Search this Thread
Unread 02-13-2016, 05:40 PM   #1
tileguynky
Tile Contractor Central Ky Area
 
Join Date: May 2005
Posts: 1,840
Resin Glass Blade and cold weather

Bought one of Pearl Abrasives new Resin Glass blades. Sure looked sharp at the demo and online. Finally broke down and bought one last month. Put it on my little wetsaw and set it on the truck. Well it is winter here, and it's been colder than usual. Pulled it out Friday and set it up to make cuts. Less than 10 cuts and the resin debonded from the saw. First, new blade is on the way from Pearl. The rep wasn't really sure if there was any testing done to see how it holds up when being stored in cold climate. Neither the box truck or the little garage are heated. So just a heads up to those who use might be using one in cold temps. Friday morning was 8 degrees without windchill. Here's a pic of the blade.
Attached Images
 

Last edited by tileguynky; 02-13-2016 at 05:57 PM.
tileguynky is offline   Reply With Quote
Sponsored Links
Unread 02-13-2016, 07:09 PM   #2
Tiger Mountain Tile Inc
Registered Muser
 
Tiger Mountain Tile Inc's Avatar
 
Join Date: Feb 2011
Location: Issaquah, Washington
Posts: 7,000
I've had my eye on that blade too. It'll be interesting to know if it's the cold weather or just a bad blade.
Tiger Mountain Tile Inc is offline   Reply With Quote
Unread 02-13-2016, 10:24 PM   #3
dhagin
builder, anti-builder, rebuilder -- Retired Moderator
 
Join Date: Mar 2009
Location: oahu
Posts: 13,164
Wow! That could be bad.
__________________
dana

"the road to hell is paved with osb, mastic, pre-mixed latex 'grout' or 'thinset', "
dhagin is offline   Reply With Quote
Unread 02-15-2016, 08:20 AM   #4
Sprung831
Tile Tool Guy
 
Sprung831's Avatar
 
Join Date: Jun 2008
Location: Brookfield, WI
Posts: 558
If you do some more research on resin bond blades, you'll find that this problem is pretty common actually. One of the biggest culprits is RPM. Be VERY careful with this. Make sure that your motor rpm is not above what the blade is rated for. I for one when testing any resin bond blade, wear a full face shield because of this exact issue.
__________________
Steve Sprung
Technical Manager
Midwest Trade Tool
www.tiletools.com
Sprung831 is offline   Reply With Quote
Unread 02-16-2016, 06:11 AM   #5
tileguynky
Tile Contractor Central Ky Area
 
Join Date: May 2005
Posts: 1,840
Max RPM stated on the blade, 3700. RPM of Felker TM-75 is 3300 rpm. Just sharing for anybody that is curious.

Last edited by tileguynky; 02-16-2016 at 06:19 AM.
tileguynky is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
For your cold weather tiling needs... Brad Denny Professionals' Hangout 17 01-05-2008 05:21 PM
Cold weather installations??? thuffner3 Professionals' Hangout 13 11-28-2007 09:32 PM
Thinset for cold weather? tileguy88 Professionals' Hangout 8 10-26-2006 08:09 PM
Cold Weather utdiy Tile Forum/Advice Board 3 02-18-2005 03:38 PM
Tile in cold weather marcnkelly Tile Forum/Advice Board 3 10-28-2003 05:45 PM


All times are GMT -6. The time now is 04:32 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC