Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet

Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Professionals' Hangout


Thread Tools Search this Thread
Unread 11-23-2007, 03:15 PM   #1
Member of Million SF Club!!
Join Date: Oct 2002
Location: Ohio
Posts: 2,648
Polishing Porcelain/Stone

I had a guy tell me the other day that he uses high gloss polyurethane to "polish" bullnose. That has never crossed my mind. Would it work?
K_Tile is offline   Reply With Quote
Sponsored Links
Unread 11-23-2007, 03:25 PM   #2
Utah Tile Contractor
Join Date: Mar 2006
Location: Riverton, Utah, Salt Lake City
Posts: 2,276
Once it was polished it would then give it a "finished" look. I have used poly on edges of stone to fake polishing with ok results. Don't know about porc.

Most the bullnose I buy looks like the edge has been painted with a matching paint/glaze. I wish there were a way to do that in the field.


EX Tile Contractor
Positive Tile and Stone
Salt Lake City, Utah
duneslider is offline   Reply With Quote
Unread 11-23-2007, 04:32 PM   #3
John Bridge
Join Date: Mar 2001
Location: Rosanky, Texas
Posts: 68,419
Send a message via AIM to John Bridge
There is a way to do it. I sometimes go to Home Depot and buy a spray can of a nearly matching paint and spray the edges. If they are not going to receive any wear or water, it'll last a long time.

Both paint and polyurethane CAN BE RUBBED OFF.
John Bridge is offline   Reply With Quote
Unread 11-23-2007, 05:55 PM   #4
Tampa Florida Tile Contractor
ceramictec's Avatar
Join Date: Oct 2007
Location: Tampa, Florida
Posts: 26,474
I did it 15 years ago to some 4x8 Buchtal Porcelain tile in Bright Red and Bright White on an old 50' style McDonalds.
they didn't make a bull nose for it so we matched the red & white polyurethane paint, stacked them on sides tight together and sprayed them, then did a gloss polyurethane to make it looked glazed.

all I can say is that it worked and was done in 4 hours we
had instant finished edge/bull nose you could say.
..........Tampa Florida Tile Installation
..............^^--Check out our Blog--^^
Tampa, Florida installer of Schluter Kerdi/Kerdiboard waterproofed showers
Tampa, Florida installer of Laticrete HydroBan/HydroBan board waterproofed showers
ceramictec is offline   Reply With Quote

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 10:23 PM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC