Durock the shower curb or tile over rubber liner

[TonyY]

I'm creating a tiled shower and need some help. I ran a rubber liner across the floor, up the 3 full walls about 8 inches and up and over the 4" curb. I had to overlap the rubber, I used cement and have good solid bond. I nailed the rubber to the 3 full walls about 7 inches up from the floor using galvanized nails then ran durock on the entire wall down to the shower floor stopping with my last screws about 5 inches up.

My question: Do I Durock the curb? I wouldn't think tiling vertical rubber surfaces would hold very well. Any help or other tips for completion would be great, thanks!

In searching, I found some info on using metal lathe over the curb and I think I have it now but should I lathe and morter over the durock walls or just tile them directly

[cx]

Welcome, Tony. )

Go to the Shower Construction thread in our whirl-famous Liberry and you'll find some good information on that and constructing the rest of your shower pan.

I recommend you read everything in that thread, matter of fact, before you go any farther on the project.

My opinion; worth price charged.