Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
Thread Tools Search this Thread
Unread 03-29-2013, 09:02 PM   #1
iajet
Registered User
 
Join Date: Mar 2013
Posts: 2
New shower stall questions....thanks in advance

New to this great forum!

I have a few questions....I am sure to have more later.

The Hardi backer website instructions say to Install boards 1/4” above floor, tub or shower pan and caulk accordingly.

1. This is 1/4 inch above the hot mopped pan or the finished mortar bed?
2. What type of caulk and what is the purpose of it?
3. At what thickness of mortar will the mortar bed on the hot mopped pan crack? I think I am looking at about 1 3/4 inches thick.
4. We are using 6 inch tumbled travertine tiles on the walls, what size grout line will look best?
5. Once the tiles are on the walls should I seal before the grout so as not to stain the tile with the colored grout and then again after grouting? Or is staining not an issue?

Thanks,
Stu
__________________
S
iajet is offline   Reply With Quote
Sponsored Links
Unread 03-29-2013, 09:26 PM   #2
Davy
Moderator -- Mud Man
 
Davy's Avatar
 
Join Date: Jan 2003
Location: Princeton,Tx.- Dallas area
Posts: 34,003
Hi Stu, welcome.

1. I think it's talking about 1/4 inch above a bath tub, then caulking. When installing in a shower stall, hold the Backer board up off the pan liner about 1/2 inch and then when mudding floor, force mud under the board to help hold it secure at the bottom. Keep all you nails/screws up 3 inches above the curb height.

2. Silicone but see 1. sounds like you have a shower stall.

3. 1 1/4 is about right but you can make it a little thicker if you want.

4. I usually make the joints about 1/8 at the bottom edge of the tile. With the cushioned edge, the grout at the top will be 1/4, maybe more in places.

5. Depends on the grout color. A dark grout in a light stone will want to stain in places, especially in the divots and veins. It's a good idea to seal first, makes cleaning a little easier.

Check out the "shower construction info" thread in the liberry. Lots of good info in there.
__________________
Davy

www.davystephenstile.com
Davy is offline   Reply With Quote
Unread 03-29-2013, 09:43 PM   #3
iajet
Registered User
 
Join Date: Mar 2013
Posts: 2
Thank you Sir.
__________________
S
iajet is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Shower stall questions for beginner mauichris Tile Forum/Advice Board 4 01-11-2008 09:44 AM
JJ's shower stall questions jamesj Tile Forum/Advice Board 3 10-30-2007 10:54 AM
Shower Stall Questions twintwin Tile Forum/Advice Board 7 01-26-2005 08:12 PM
Questions concerning 1965 shower stall. sheeez Tile Forum/Advice Board 3 08-23-2004 06:50 PM
shower stall project / questions hallstenokc Tile Forum/Advice Board 4 10-02-2002 05:03 PM


All times are GMT -6. The time now is 07:27 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC