Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
 
Thread Tools Search this Thread
Old 06-13-2019, 09:08 PM   #16
KiwiTiler
Registered User
 
Join Date: Oct 2018
Location: New Zealand
Posts: 19
Yep. Again, you get a feel for it but it's why we keep a jug handy. Consistency is important.

On 50lb bags, 1 cup of water can be difference between just right and too thick/thin for the situation. Mix for 2 minutes, let it slake, mix again after 5-10

Mark
__________________
Mark
KiwiTiler is offline   Reply With Quote
Old 06-14-2019, 06:40 PM   #17
Bills Sis
Registered User
 
Join Date: Jun 2019
Location: Oklahoma City, OK
Posts: 4
Here are two additional pictures. One is of the area where the 6 by 6 tiles were and the other shows the backs of two broken 6 by 6 tiles. Yes, the backs are clean, but they were on the wall. Is everyone happy with the pictures are now matching each other?

One final question...so what do I do now? There is a fairly large gap (about an eighth inch) in between the tile and cementboard. It's obvious all the factors previously mentioned played a part in this mess. Do I take the whole wall down (it's about 5' high by 3' wide) and start all over?
Attached Images
  
__________________
Denise
Bills Sis is offline   Reply With Quote
Old 06-14-2019, 07:51 PM   #18
Davy
Moderator -- Mud Man
 
Davy's Avatar
 
Join Date: Jan 2003
Location: Princeton,Tx.- Dallas area
Posts: 31,385
I would gently pry on more tiles. If more come off real easy, it may be best to take it all down.
__________________
Davy

www.davystephenstile.com
Davy is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Can I easily regrout this tile? newbie alert dosstx Tile Forum/Advice Board 10 09-10-2015 08:00 PM
adding screws to backerboard after thinset dries steadyhand Tile Forum/Advice Board 2 07-29-2007 10:52 AM
Porcelain tile makes lippage as it dries...wasn't there before elsieCat Tile Forum/Advice Board 22 04-14-2007 05:50 PM
Thinset dries too fast Redwald Tile Forum/Advice Board 7 08-14-2006 06:58 AM
Removing 2 bullnose tile easily patti348 Tile Forum/Advice Board 1 03-06-2005 12:29 PM


All times are GMT -6. The time now is 01:36 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC