Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
 
Thread Tools Search this Thread
Old 05-16-2018, 12:58 PM   #1
Fynn
Registered User
 
Join Date: May 2018
Posts: 2
Uneven tiling; crack in grout; bump in floor tiles

Hi!

We just finished remodeling a home before moving in, and although most of it was done to our satisfaction, we have come across several problems: floor tiling not even with wall in shower (visible corner); grout cracking along the whole length of bath tub and in corner of kitchen backsplash; cracks on either side of bathroom vanity and wall, small bump in floor tiling in bathroom (feels like top of a golf ball underneath the tiles); etc. Can these items be fixed? How should we address these issues with contractor? We have paid him for everything except what was left over since last payment (not much is left to pay).
Attached Images
     
__________________
Fynn
Fynn is offline   Reply With Quote
Sponsored Links
Old 05-16-2018, 01:06 PM   #2
cx
Da Home Builder
 
cx's Avatar
 
Join Date: Jul 2001
Location: Boerne, Texas
Posts: 86,162
Welcome, Fynn.

Each of those places you've pictured should have had a flexible sealant rather than grout. Your tile professional should know that.

The shower floor is a particularly sloppy looking edge to my eye.

What you can do about it? I dunno. First step is to point out all those issues to your contractor and start a discussion.

My opinion; worth price charged.
__________________
CX

Y'ALL NEW VISITORS READ THIS HERE!
cx is offline   Reply With Quote
Old 05-16-2018, 03:10 PM   #3
jadnashua
Veteran DIYer- Schluterville Graduate

STAR Senior Contributor

 
Join Date: Jul 2004
Location: Nashua, NH
Posts: 12,416
Accepted industry standards, as CX mentioned, call for all changes of plane and changes of material, or up against a rigid surface need a flexible joint. The easier one to install is to use caulk. Grout colored caulk is available for many of those available out there from the grout manufacturer, and at least one company will mix some for your specific grout, if the manufacturer doesn't.

At a minimum, you should expect things to be installed according to industry standards, which is the minimum required to be reliable. The TCNA publishes those standards, updated annually to account for new methods and materials as they evolve and are developed and from lessons learned. The flexible joint has been in there for decades, though, and is nothing new.
__________________
Jim DeBruycker
Not a pro, multiple Schluter Workshops (Schluterville and 2013 and 2014 at Schluter Headquarters), Mapei Training 2014, Laticrete Workshop 2014, Custom Building Products Workshop 2015, and Longtime Forum Participant.
jadnashua is offline   Reply With Quote
Old 05-16-2018, 03:54 PM   #4
mark999
Registered User
 
Join Date: Aug 2013
Location: st louis mo.
Posts: 440
Fynn,

how much is left to pay the contractor?

From here it looks like most of your issues could be fixed by removing the gout and installing caulk preferbly silicone(sanded?)

The shower floor is a different story. I would want that tile to the wall to all be the same and all those joints from floor to wall should be dug out and caulked.

Your contractor should be happy to remedy the issues and make you happy. If he balks then you got the wrong guy.
__________________
Mark
mark999 is offline   Reply With Quote
Old 05-16-2018, 04:31 PM   #5
Fynn
Registered User
 
Join Date: May 2018
Posts: 2
Thank you all for the great feedback! I will mention these points to our contractor.

Mark: We have about two thousand left to pay for final payment. We remodeled a lot of the house (pretty much every room) so it is a fraction of what we've already paid.

In fact, the remodeling cost almost twice as much and took twice as long as originally expected (we had multiple move-in dates go by before we were finally able to move-in, and we still had a couple of months of the contractor coming in every day to complete the project). Extremely exhausting!
__________________
Fynn
Fynn is offline   Reply With Quote
Old 05-17-2018, 12:27 AM   #6
Kman
Moderator
 
Kman's Avatar
 
Join Date: Nov 2006
Location: NW Arkansas, Ozark Mountains
Posts: 9,746
That's one of the pitfalls of remodeling. Nothing goes according to schedule. The only way to speed up the process is to offer incentives for finishing on or before the promised date, and penalties for finishing after.

And have a contract.
__________________
Kevin

The top ten reasons to procrastinate:

1.
Kman is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
First Timer with seem bump and uneven edges me2dumb4college Tile Forum/Advice Board 3 12-22-2015 03:05 PM
Whats the best way to tile over bump in wall?? or get rid of bump.... shawninvancouver Tile Forum/Advice Board 6 08-23-2010 11:08 AM
Speed Bump - First time tiling clumcw Tile Forum/Advice Board 5 11-05-2009 03:19 PM
tiles done... few uneven grout lines on floor surgeon Tile Forum/Advice Board 6 10-16-2009 03:01 PM
Tiling over uneven floor Toolman Professionals' Hangout 2 02-27-2005 06:01 PM


All times are GMT -6. The time now is 09:45 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC