Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Tile Forum/Advice Board

Sponsors


Reply
 
Thread Tools Search this Thread
Old 02-07-2018, 01:31 PM   #1
nicpaige
Registered User
 
Join Date: Dec 2017
Posts: 16
Plumbing forums no replies so I'll try here

Hello everyone. I currently am combining two bedrooms into one and taking the 1/2 bath in the master and making it a full bath with walk in shower. The big issue is this is a slab ranch house. So demo of the slab is necessary. I have attached a print of the project. My question is how I plan on routing the drains for new shower and vanity. Please advise if its all messed up or changes to make things better to plumb...thanks again.
I live in Ohio if that matters. Basically the plan is to expose the toilet waste line and cut the cast pipe out, tie in a PVC with fernco and t- off that to pickup the shower drain. The sink drain will be picked up by the shower line with a wet vent.
Attached Images
File Type: pdf drains vents.pdf (6.2 KB, 73 views)
__________________
Paige
nicpaige is offline   Reply With Quote
Sponsored Links
Old 02-07-2018, 01:55 PM   #2
GHR
Registered User
 
Join Date: May 2006
Location: Houston, Tx
Posts: 1,594
What "plumbing forum" did you try?

The biggest one I know of is : http://terrylove.com/

The folks here will help you out though.
__________________
I'm Henry
Money talks alright... All ever says to me is "Goodbye!"
GHR is offline   Reply With Quote
Old 02-07-2018, 06:17 PM   #3
Carbidetooth
Hmmmmm
 
Carbidetooth's Avatar
 
Join Date: Mar 2010
Location: Boise, ID
Posts: 1,126
Hard to tell from your drawings, but generally wet vents are not allowed by ahj. Even if they were or if job not being inspected I'd look for alternatives.

Can't tee into horizontal waste lines, should use wye so there's more of a sweeping transition.

If walls are uncovered photos of existing would help. Vents can be tied together in attic. I'd be looking for a way to vent the vanity and shower separately close to drains. Usually 5' considered max.

Where is the vanity vent?
__________________
Peter
Carbidetooth is offline   Reply With Quote
Old 02-07-2018, 06:22 PM   #4
jadnashua
Veteran DIYer- Schluterville Graduate

STAR Senior Contributor

 
Join Date: Jul 2004
Location: Nashua, NH
Posts: 12,350
Don't think that you have acceptable venting in that scheme. Generally, if I understand it properly, if say your shower was vented properly, you could wet vent the toilet from it, but the toilet flow going past an unvented shower would suck that trap dry.
__________________
Jim DeBruycker
Not a pro, multiple Schluter Workshops (Schluterville and 2013 and 2014 at Schluter Headquarters), Mapei Training 2014, Laticrete Workshop 2014, Custom Building Products Workshop 2015, and Longtime Forum Participant.
jadnashua is online now   Reply With Quote
Old 02-08-2018, 05:25 AM   #5
nicpaige
Registered User
 
Join Date: Dec 2017
Posts: 16
Thanks for the replies. I did post on the terry love forum with no responses.
__________________
Paige
nicpaige is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Plumbing Forums? austinpower Tile Forum/Advice Board 5 02-21-2010 08:57 AM
JB Forums John K Computer Training 15 10-14-2009 08:21 PM
New Guy to the Forums ckl111 Professionals' Hangout 10 09-09-2007 09:22 AM
Other forums? JimC Tile Forum/Advice Board 3 04-15-2005 11:52 AM
massive replies Davestone Tile Forum/Advice Board 27 04-21-2004 06:19 PM


All times are GMT -6. The time now is 08:15 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC