View Single Post
Unread 01-28-2006, 04:19 PM   #1
Registered User
Join Date: Jan 2006
Location: Central Florida
Posts: 23
Question Huge Gap in Vanity Top Backsplash

Hi, We're redoing a little bit of our bathroom putting new fixtures and such in. We have found out the wall is not square. We took the old vanity out and went to put the new one in and it doesn't sit square. We got it in okay, but the vanity top (made out of marble) is will not sit flush. The only way it will sit "straight" is to NOT be against the wall, hence we have a large gap between the backsplash and wall (tiled). What would be the best resolution? We thought about grouting it, but we'll have a huge (about 1 Inch) grout line. But that' the only thing I can come up with. Tearing the entire wall and tile down is NOT an option at this time. We've got to figure out some way to work around the crookedness. Any suggestions would be appreicated. Thanks!

Here's a picture so you can see what I'm talking about.
shorty is offline   Reply With Quote