View Single Post
Unread 02-18-2019, 02:48 PM   #3
jadnashua
Veteran DIYer- Schluterville Graduate

STAR Senior Contributor

 
Join Date: Jul 2004
Location: Nashua, NH
Posts: 14,996
Surface tension will tend to follow the variations in the floor unless it is deep enough. Many of them want at least 1/2" over the top of the highest point on a wooden subfloor. You can do it with less, but it takes more skill.

IMHO, they shouldn't call the stuff 'self-leveling'. Keep in mind, even water isn't exactly a flat surface as can be seen from a droplet on a freshly waxed car.
__________________
Jim DeBruycker
Not a pro, multiple Schluter Workshops (Schluterville and 2013 and 2014 at Schluter Headquarters), Mapei Training 2014, Laticrete Workshop 2014, Custom Building Products Workshop 2015, and Longtime Forum Participant.
jadnashua is offline   Reply With Quote