View Single Post
Unread 09-17-2014, 10:29 PM   #5
01sesedan
Registered User
 
Join Date: Aug 2007
Location: Tallahassee, Florida
Posts: 21
I'm going to check with code enforcement in the morning.

I got the step down idea from a family member down in South Florida who cut out the slab, removed 3 inches of sand/dirt, lowered the drain. Poured a new slab around 4" thick, leaving 3" step-down. The pre-slope and tile.

Not sure what they used for waterproofing on the floor. Walls were durock, seams taped with thinset and several coats if redgard.

This is what I was also planning. Just wondering if curbless could also be constructed in a 34" x 60" shower. If it's too complicated, I may just do a step down.

Here's the step down shower completed.
Attached Images
   
__________________
Joe
01sesedan is offline   Reply With Quote