View Single Post
Unread 06-14-2010, 09:13 AM   #2
Stone Dude
Registered User
 
Join Date: Jul 2009
Location: Southern California
Posts: 897
I would try mineral spirits. let it sit on the surface for 30 seconds or so, then scrub with a terry cloth towel.

if that doesnt work you may be able to use a highly diluted solution of sulfamic acid crystals and a terry cloth towel.

doing this will most likely effect the sealer in the grout as well, I would plan on doing one more application. when you put the sealer in the grout, you can immediately buff the excess off the tile with a microfiber rag.
__________________
Cameron DeMille
SFA, MIA

MilleStone Marble and Tile Inc.
MillestoneMarble.com
Stone Dude is offline   Reply With Quote