View Single Post
Unread 04-25-2019, 01:38 PM   #5
attdsltech
Registered User
 
Join Date: Apr 2019
Posts: 27
Kerdi Shower tray question

Progressing on master bath remodel prepping rough plumbing for new shower. Here's the question. The shower is going to be 53" × 65" I plan on using a 72"×72" prefab tray trimming width to 53" taking 9.5" off sides. The question is length. I need the drain at 36" due to floor joists. Is there going to be an issue if I just cut 7" off far end of tray? Schluter says to trim evenly from both sides. Thanks in Advance



Sent from my SM-G955U using Tapatalk
__________________
Dennis
attdsltech is offline   Reply With Quote