View Single Post
Old 03-13-2018, 01:34 PM   #19
Wagmaster
Registered User
 
Wagmaster's Avatar
 
Join Date: Jul 2007
Location: Atlanta, GA
Posts: 19
Thread Necro!

Hello again! The tile portion of this never-ending project is finally going to move forward. Long story... :-P

Anyway I would like to solicit some advice on a 7" saw blade for a Felker TM-75. I need to make a significant number of precision cuts to 3/8" granite and polished travertine - and want to minimize chipping and rough edges as much as possible, as these will be highly visible. I'll also be cutting 3/8" Italian Porcelain as well.

I've searched and perused a number of threads here, and these two blades in particular seemed like good choices for this application...

Pearl 6090 P4 Turbo Mesh http://www.contractorsdirect.com/Pea...l1021=7%20inch
Alpha Porcellana 6500 http://www.contractorsdirect.com/Alp...custcol13=7%22

Any thoughts on this selection, or other suggestions?

Your thoughts are much appreciated!
__________________
Dana

––This post certified 100% Orc-free––

Last edited by Wagmaster; 03-13-2018 at 06:24 PM. Reason: added web links
Wagmaster is offline   Reply With Quote