View Single Post
Unread 08-04-2015, 05:59 PM   #45
amodoko
Registered User
 
Join Date: Jan 2012
Posts: 66
Okay thanks a bunch. I will use the 1/8 bends (I believe they are also just called 45 degree fittings) to move the drain location from above. I am pretty sure the shower base just needs a basic solvent welded PVC drain like this one

http://www.lowes.com/pd_253149-138-4...=50314985&Ntt=

My only other question is do you think I should bed the shower base in mortar or just lay it down without any bedding material? I was going to avoid using any bedding material (since it doesn't seem required based on the shower base structure) so if something went wrong the shower base would be easier to remove but at the same time I don't want the shower base to crack over time because it isn't supported further with a mortar bed.
__________________
AM
amodoko is offline   Reply With Quote